Cars can feel like babies, and taking care of them can feel like showing how much you love them. Many car lovers will agree with you on this, and putting time and money into your car can give it the look and performance you’ve been wanting. Whether you want a modern, sleek look or something more sporty, you can find it.
Tires are a part of your car that you might not think about as much. People often talk about how tyres look and how big they are, but they don’t talk about which way the tread goes. But if you’ve ever wondered if you can put your car tyres on backward, this is something you need to know.
So, is it possible to put car tyres on backwards? When car tyres are put on in the right way, they work best. This is because the tread is made to work in a certain way from front to back to get the most out of the tyre.
Today, we’ll talk about the three main types of tyre treads, but only one of them lets you put a tyre on backwards. But this does mean that you can put some car tyres on backward, but not all.
Even though this might not seem like the right thing to do, there are some good reasons to do it. We’ll talk about those later.
Why Tire Treads Matter
The tread of a tyre is the pattern of lines you can see on the outside of the rubber wheel that touches the ground. There are different kinds of this design and pattern, and as time goes on, it tends to wear down and make the road more slippery.
The tread gives your wheel grip, especially at higher speeds and in bad weather. This keeps you from sliding on roads that are wet or slick.
If the tread on the tyre is too low, rain or snow could cause an accident if the ground is wet. So, tyres are usually switched every six months to make sure they all wear down at the same rate.
This keeps all four wheels working at the same level as they wear down, so that one tyre won’t make your car pull in one direction.
Benefits of Putting Tires on Backwards
As I said, some of you might think that this isn’t a question that needs to be answered.
What would be the point of doing that to a car?
But the truth is that putting your tyres on backwards can be good for your tyres and their tread.
When you drive your car for a long time on the same tyres, the tread may wear down in different places because of how the roads are and what kind of roads you drive on.
This can happen even if you rotate and change your tyres as you should, and it’s more likely to happen if only one tyre is replaced when one pops. The others usually have it worse.
If your tyres can, putting them on backwards can help them wear down more evenly and keep the tread deeper and more effective for a long time.
Types of Tire Treads Available
There are three types of tyre treads that are common and used often in the car world. These are radial types, which can be further broken down into asymmetrical and symmetrical types.
Then there are directional tyres, which are also called unidirectional tyres. These are the only tyres that could technically be put on “backward.”
All of these tyre treads serve different needs and are used for different reasons by drivers. So, let’s talk about how these tyre treads are different.
Radial tyres are only made to go in one direction. There is an arrow on the sidewall that shows which way the tyre should be put on.
On the sidewall, there is usually a single dot, usually in bright red, that lines up with the tubeless valve when the tyre is put on correctly. There are two different kinds of radial tyres, and neither can be put on backwards.
These tyres have a different tread pattern on each side, and you shouldn’t turn them around because each tread will wear down at a different rate.
If you turned them around, the tread on the inside of the tyre that wears down slowly would change how well the car drives and how smooth the ride is. It can also put the driver and other people in the car in danger.
The tread on these kinds of tyres has a single pattern or design that goes all the way around the tyre.
The tread, on the other hand, has a bit more of a direction to it and should still be put on so that the pointy part faces the front of the car.
If the direction of this slightly different pattern is changed, the car is more likely to crash because it won’t be able to handle itself well.
A unidirectional tyre has what is called a “directional thread,” which has a design that clearly flows in one direction.
On the sides of the main design, there are also grooves that can point in the same direction as the middle or be cut straight across.
This pattern helps the tyre get rid of water more quickly and effectively while it’s on the road.
What Will Change If My Tires Are on Backwards?
Even though it is possible to put your tyres on backwards, it is not a good idea to leave them that way for a long time.
Putting your tyre on backwards might make it wear more evenly, but you’ll lose the lower risk of hydroplaning and better performance at high speeds.
When you put on backwards unidirectional tyres with directional thread, the thread goes in the opposite direction. This means that the thread can’t do the job it was meant to do, or at least not nearly as well as it was supposed to.
This can make it more likely that something bad will happen.
Most people believe, however, that putting any type of tyre on backward will affect the way the wheel works, not just the rubber tyre itself. This isn’t quite true.
In fact, it is true that tyres can be put on and driven without getting damaged, and it also doesn’t seem to have as big of an effect as many people thought it would.
That doesn’t mean that the performance of a backward tyre didn’t get worse, but it didn’t get worse as fast as was thought before.
It was shown that the effect on both dry and wet roads was only a little bit smaller. But I should make it clear that the performance was measured only at average speeds and not at high speeds.
Is It a Good Idea?
Well, it’s not as dangerous as people thought at first. It can also help your tyres wear out more evenly than if you always had them facing forward.
So, if you get your tyres rotated or changed and your one-way tyres are put on backward, you don’t have to stop driving right away until your local shop can fix the problem.
When you need to, you can drive a short distance without much risk. But you’ll need to change a few things about how you drive to make sure you’re as safe as possible.
You should drive a little slower than usual, especially when it’s raining, so you can get the tyres back on as soon as you can.
So, is it smart to drive with your tyres on the wrong way around? Well, no.
But if you find out that the tyre shop made a mistake, you don’t have to worry that it will ruin your wheels or make it dangerous to drive.
Just change the way you drive, stay off the road unless you have to, and make an appointment to get your tyres put back on at a tyre shop.
When you know that your tyres are supposed to be put on in a certain way, it’s easy to tell which way they should go. However, because some tyre shops have to work quickly to keep up with the number of customers, mistakes can happen.
If your radial tyres have treads that are either asymmetrical or symmetrical, you shouldn’t drive on them at all.
Your tyre will be hurt by this.
But if you have unidirectional tyres with directional tread, you won’t have to worry as much.
So, if you see that your tyres with directional tread are on backward, you don’t need to worry that your wheels are going to get damaged.
Just do what this article says and get to the store as soon as you can, and everything will be fine.