A Chevy Equinox can be a lot of fun to drive, but what if you need to have it towed? If you want to know if you can flat tow your Equinox, you can find out how here.
- Volkswagen Virtus Ventos Relacement Revealed Updated 12/2023
- How To Install Led Lights In Car Headlights Updated 12/2023
- Do Jeep Wrangler Lifespan Long? Updated 12/2023
- Car Stopped While Driving Updated 12/2023
- How To Fix A Radiator Leak With J B Weld. Which Jb Weld Is Best For Radiator Repair Updated 12/2023
The Chevy Equinox can be flat towed if you have the right equipment and safety measures in place. This will let you do the job safely and flat-tow your car to wherever you need it to go.
If you don’t know what flat towing is or how to do it with your Equinox, you don’t have to go anywhere else to find out. With a simple guide, we’ll go over everything you need to know to safely flat-tow your car.
How To Flat Tow Your Chevy Equinox: A Simple Guide
If you want to know how to flat tow your Chevy Equinox behind your RV, you need to make sure you do it right.
This will let you safely hook up the car to your RV and tow bar so that it won’t get damaged if you need to take it off.
Follow these easy instructions and tips to make sure you are towing your Equinox correctly and keeping yourself and other people safe while flat towing your vehicle on the road.
Step 1: Pick Your Type of Tow Bar
There are different kinds of tow bars that you can use to connect your Equinox to your RV, and each has its own pros and cons. So, here are the different kinds and what’s good and bad about each.
RV-Mounted that Self-Align
These tow bars are attached to the RV and can be easily folded up when you don’t need to use them to pull a car. These options are also self-aligning, which makes installation easier because you don’t have to be as precise with the positioning because it moves a bit from side to side.
This makes the tow vehicle move more naturally and less stiffly than it would if it didn’t move at all.
Also, because they are attached to the RV, most of the weight stays on the back of the bigger vehicle instead of on the back of your Chevy, which is better for the parts.
Vehicle-Mounted that Self-Align
If you choose a tow bar that is attached to your car, you will put it on the front of your Chevy Equinox.
This makes it a less popular choice, but it can work for people who don’t tow very often and will take the attachment off between tows.
This choice also self-aligns, like the first choice, but it can sometimes be a bit cheaper. This makes it a good choice for people who only tow once or twice a year.
The A-frame tow bar is a stricter option that makes you drive more carefully because the bar doesn’t adjust itself while you’re driving.
This will attach to both the car and the RV, but you have to put it together in the right place because the bar won’t line itself up while you’re driving.
Step 2: Install the Tow Bar
This will depend on which option you choose, but the packaging will have clear instructions. Carefully follow those instructions to make sure you stay safe.
You might need to have a drill handy for this, since you might need to drill a hole or two during the process to make sure everything fits right.
Also, be careful about where you drill. If you drill in the wrong place and need to drill another hole, it could weaken the frame and cause problems in the future.
Find Your Mounting Points
These are near the front bumper of your Chevy Equinox and need to be connected to the tow bar’s mounting brackets.
Mark the middle of the two points, and then measure the same distance from each side of the centre mark to the mounting bracket spots.
Then, you’ll mark where the holes should be drilled. Make sure these marks are where they should be so you don’t have to do them again.
Step 3: Put the Mounting Bracket Together
For the tow bar to be put on correctly, the brackets will need to be put together in the right way. So, you will need to follow the instructions that come with the brackets you buy.
There may be a lot of bolts and nuts you need to tighten, so you should check each one to make sure it’s done right.
Step 4: Installing the Tow Bar
Once the mounting brackets are on the RV, the tow bar will need to be put on. This will be done by putting the triangle’s point between the brackets, so that it is in the middle of the two sides.
Then, take the pins that come with the tow bar and put them on each side of the bar. After you put the pin in, you will move the ring at the end of the pin to the other side.
This will lock the pin in place and keep it from coming loose while you drive.
Step 5: Attach To the RV
Once the tow bar is securely attached to the vehicle, you will need to connect it to the vehicle you want to pull. This could be very different depending on what kind of tow bar you have.
Most of the time, though, this is done with a ball hitch. This means you have to lift the tow bar up over the RV’s ball and lock it in place.
Step 6: Brakes
In some states, you may also need to add more brakes. Before you install the bar, check to see if you need to do this.
What is Flat Towing?
Flat towing, also called “four-down towing,” is when an RV pulls a car behind it while the car stays on all four tyres. This lets the car roll along the same path as the RV without the need for ramps or towing equipment.
This is perfect if you want to travel as a family with everyone in the RV at the same time without needing someone to drive the Chevy Equinox behind you alone or with part of the family.
To flat-tow a car, you need a single tow bar that connects your Chevy Equinox to your RV so that all four wheels are on the ground and can move as you drive.
Most automatic cars are made to be towed with the steering wheel unlocked and in the neutral gear.
This lets the RV’s wheels and steering wheel move with it without hurting the engine. But not all cars are made to do this, so you need to make sure yours can before you try to flat tow it.
If you don’t, putting your car in neutral could hurt the transmission because the transmission still needs lubrication, which it won’t get while the car is being flat towed. This could hurt the engine badly and give you a lot of trouble with your car.
What Vehicles Can Be Flat Towed?
There are a lot of vehicles that can be flat-towed without getting damaged. Checking the owner’s manual of your car is the easiest way to find out if it can be flat-towed.
The manufacturer will say if the car can be pulled on all four wheels, if it needs to be pulled onto a truck bed or trailer, or if it can be pulled with two wheels down.
Two-wheel-down towing is called “two-down,” and it means that both of the driven wheels are off the ground while the other two wheels are on the road.
If you don’t have the owner’s manual anymore or can’t find it, you can check the website of the company that made the product. You can often look at an online version of the manual to see if the car can be safely flat towed.
How Flat Towing Works
When you flat-tow a car, you pull it while all four of its wheels are still on the road. This keeps the car level on the road by pulling it behind an RV with a tow bar.
To pull the car, a tow bar is used, which hooks the car up to the back of the RV. This holds your Chevy Equinox in place so that it is level with the road and all four tyres are parallel to the street.
The only thing you need to flat-tow a car is a tow bar, so this is one of the easiest ways to tow your car when you want to go on a trip with your RV. It also takes up less space than other ways to tow when you need to park your RV and vehicle.
It sounds like a great idea to flat-tow a car if your car can handle it. Well, you will be able to flat tow your Chevy Equinox behind your RV if you own one.
With this article’s instructions and the instructions that come with the tow bar you buy, it’s easy to install a tow bar and start towing.