Updated at: 30-06-2022 - By: Lucas

You might want to write on a car window for many different reasons.

You might work at a car lot and need to write the price on the car, or you might want to leave someone a note on their car.

No matter what, you may wonder if dry erase markers are safe to use on the windows of your car.

Dry-erase markers can be used to write temporary messages on car windows without causing any damage that will last for a long time. They are cheap, easy to find, and easy to clean as long as you don’t leave the ink on too long. If it rains or snows, the dry-erase message might not be able to be seen as long.

Since cars are made of metal, it is unlikely that dry erase markers will stick to the surface.

Read on to learn more about how to colour your car safely with dry erase markers.

What is a Dry Erase Marker and Why Is It Safe To Use on Glass?

Can You Use Dry Erase Markers On Car Windows-2

A popular way to write on whiteboards is with a dry-erase marker. It’s also good for

Film for an overhead projector

Melamine

Signboards

Porcelain

Certain non-porous surfaces

It stays put on porous surfaces like paper or cloth, but can be erased on other surfaces.

Isopropyl alcohol (isopropanol), SD alcohol-40, and resin are the three chemicals in the marker.

Some of these chemicals are very flammable, so it should never be near a flame. The chemicals also give off dangerous fumes that can hurt your health.

But dry-erase markers can be used on car windows because the glass doesn’t have pores.

When a dry-erase marker is used on the car windows or mirrors, they become whiteboards, which makes them very easy to clean.

The things you use to write on the car should be water-resistant, easy to remove, and easy to read.

The surface should be clean so that the glass or paint won’t get scratched.

It’s not against the law to write on the window of your car. But the writing shouldn’t get in your way or distract you while you’re driving.

Read on to find out more about how to write on your car window and how to clean it afterward.

Will Dry Erase Markers Damage Car Windows?

Can You Use Dry Erase Markers On Car Windows-1

Dry-erase markers won’t damage windows because they’re pretty easy to clean with strong solutions like:

90–99 percent of the solution of isopropyl alcohol

Peroxide

WD-40

Toothpaste

Hand Sanitizer

Ben-Gay

Comet

Hairspray

Any tough stains that remain after cleaning can be taken off with a sharp razor blade.

A dry-erase marker is different from a wet-erase marker (washable markers).

Wet-erase markers aren’t completely permanent, and you can wipe them off with a damp cloth.

Some people put white shoe polish on their cars because it is easy to see but hard to get off.

To clean it, you will have to scrub hard, which could damage the paint on your car.

When writing on your car, it’s best not to use anything that will be hard to get off.

How to Get Dry Erase Marker Writing off a Car

If you want to get writing off the windows, you might want to think about what kind of marker was used.

Make sure the surface where you want to get rid of writing is clean before you start.

  1. Soak a paper towel or cloth in a strong solvent like nail polish remover, MEK, isopropyl alcohol, methyl ethyl ketone, or acetone to make a permanent marker.

You can also use a wet cloth or paper towel to wipe off the marker from the car window.

2.To get rid of writing made with a dry-erase marker, put some rubbing alcohol on a cloth and rub it gently. Use a wet cloth or paper towel to wipe the area.

  1. Use a clean razor blade to scrape off writing made with crayons or grease pens.

FAQs

Can I permanently mark glass?

Since glass doesn’t have pores, it’s hard to write on it in a way that will last, but there are other ways to make writing last longer.

Acrylic paint pens can be used, but they won’t last as long as a permanent marker.

Can I use shoe polish to write on my car window?

This is a quick, cheap, and easy way to write something on the window of your car.

But stay away from the body because you might damage the paint if you clean it.

Are dry erase markers toxic on the skin?

Even though most markers are safe, some of them have methyl isobutyl ketone in them.

This chemical irritates the nose and eyes and can cause headaches, dizziness, nausea, and weakness, among other things.

If you use a marker on your skin, you could get very sick. If you get marks on your skin, you can use rubbing alcohol to get rid of them.

Then, wash your skin with soap and warm water to get rid of any leftover chemicals.

Will dry erase markers damage my car paint?

Dry-erase markers are easy to clean because you don’t have to scrub them or use harsh chemicals. So, it’s safe to say that the paint on your car won’t be hurt.

What’s the best way to write on glass?

It depends on what you want to write and how long you want the message to be.

If you want the message to be seen quickly, use a wet or dry erase marker.

Use an oil-based Sharpie Paint Marker, an acrylic paint pen, or a permanent marker to write messages that will last longer.

What can I use to paint my car window?

To make your designs, you will need acrylic craft paint that is water-based and brushes of different sizes.

To get rid of the paint, you will need a razor blade.

How do I permanently write on glass?

For a clean surface, you first clean the surface with vodka, white vinegar, or lacquer thinner.

Tape the design to the inside of the glass, and then use your Oil-Based Sharpie Paint Markers to trace it.

If you want the design to last, bake it for a few hours. The design will then be permanent.

Does rubbing alcohol stain clothes?

If the paint or marker you are using stains your clothes, you can use rubbing alcohol to get rid of the stain.

Don’t forget to try the alcohol on a small, hidden part of your cloth and let it dry.

If the alcohol doesn’t hurt the fabric, use a cotton ball to rub out the stain.

Don’t pour the alcohol on the spot.

What is the difference between a bullet tip and a chisel tip?

Between the two, a bullet tip is more common. It makes strokes that are 2–3 mm thick.

On the other hand, the Chisel tip makes three different thicknesses that range from 2 to 5 mm.