Updated at: 10-03-2022 - By: micdot

Jumpstarting a dead battery is a simple and effective approach to bring a vehicle back to life. In some cases, jumping your car’s battery is a waste of time since it doesn’t work. The automobile won’t start and there is no clicking sounds, according to some users. Knowing what to do in these instances is essential for any driver. Otherwise, you may be caught off guard and not know what to do.

There are a number of reasons why your automobile won’t start, and there is no clicking sounds to indicate a problem. Listed below are the possible causes for your vehicle’s malfunctions, which you can examine one by one to determine the root cause. Stay tuned if you’d want to learn why your automobile won’t start and doesn’t make a clicking noise. If your automobile won’t start, you’ll know exactly what to do and why after reading this article.

Reasons Car Won’t Jump Start No Clicking Noise

Several factors can prevent your automobile from starting, including a dead battery, a failed jumper cable, or the lack of a clicking sounds coming from the starter. Checking out the items on these lists will help you eliminate potential causes for why your car won’t start and you don’t hear a clicking noise when you try to kickstart it.

If your automobile won’t start and you don’t hear a clicking sound, here are the likely causes:.

You Might Have A Dead Battery

A dead battery is one possibility. It’s possible to restart a dead battery, however. A dead battery could be the cause of your car’s inability to start. We use the term “dead” to refer to a damaged or dead battery. It’s possible that this already needs to be changed due to its inability to hold a charge.

The electrical components and wires might be checked, but even if you did, it wouldn’t help if the problem is your car battery. If your automobile won’t start or makes no clicking sounds, the most likely culprit is this. Damaged and dead batteries need to be replaced as soon as possible.

You Might Have A Faulty Spark Plugs

Spark plugs may need to be replaced if your car doesn’t start making a clicking sound.. Your car’s engine may not be getting enough sparks if it doesn’t make a clicking sound. The engine won’t start unless there is a spark.

As a result, it is imperative that spark plugs be checked and replaced on a regular basis. You can do it yourself, but many people are intimidated by the process and opt to have the mechanic handle it.

You Might Have A Blown Fuse Or Faulty Ignition Switch

Checking for a blown fuse or a bad ignition switch should be your next step after making sure your car battery is fine. You’ll need to locate the fuse box to fix the problem. After searching for it, you can consult the owner’s manual.

Locate the fuse box and examine the fuse and any metal wire for damage. Don’t hesitate to fix any loose or disconnected wires at their original pricing if you see them in your home. Your starting relay won’t be able to start the engine if a blown fuse is present. If your fuse is functioning properly and is not damaged, you should inspect the ignition switch for any malfunctions. It’s possible that the ignition switch isn’t operating properly.

You Might Have A Damaged Fuel Filter

Make certain your gasoline filter is in good working order. It’s time to replace your fuel filter if it’s already damaged. Fuel will not reach the engine if the fuel filter is clogged or damaged.

You Might Have An Empty Gas Tank

One of the most common and obvious reasons why individuals misjudge is because of this. Due to the fact that your gas tank is nearly empty, you may not be able to hear a clicking sounds from your car. You should always double-check the fuel gauge, as it might be inaccurate at times. Due to the cold weather, your fuel line may possibly freeze up.

You Might Have A Faulty Starter

If your starter is malfunctioning, your vehicle may not start and make no clicking noises. Your starter is the part of your car that cranks the engine to get it going. Possibly, your starter isn’t getting enough power.

If your car won’t start, you might try using a jumper cable to get it going again. Use your owner’s manual to verify this. A voltmeter is also required.

You Might Have An Impaired Or Damaged Ignition

Similarly to the starter, a malfunctioning ignition might prevent your vehicle from starting. If you can turn on your headlights, but your car won’t start, you may have a starting or ignition problem. A charged battery can be used to jump-start your starter engine if your ignition is disabled or damaged. If your automobile won’t start or make a clicking sound, here are some of the reasons why. You can go through them one by one until you find the root of the problem.

What to Do When a Car Won’t Jump Start and No Clicking Noise?

If your automobile won’t start and you don’t hear any clicking, there are a slew of possibilities. Battery, alternator, and cable connections are just a few of the things that can go wrong. If your car won’t start and you don’t hear a clicking sound, here are some things you can do.

1. Try To Jump Start Your Car Once Again

You can give it another go at starting the automobile. If you try to jumpstart the car again and it starts for a few seconds or a minute, but then dies again, you may have a problem with your alternator. You’ll need to drive your car about for a few minutes to recharge the battery if it starts. Even if the battery is dead, the engine can still be started by using a jumper cable. If it won’t start, there may be other issues that need to be addressed first, such as a faulty battery or alternator.

2. Inspect The Battery Cables And The Wirings

Inspecting the battery cables and wiring may be necessary if the first step was unsuccessful. Wires must be examined to ensure that they are free of damage and in good working order. Make sure they’re all in the right places.

There’s a good chance your automobile may break down due of a few loose wires or corroded battery connections, which is why you should always inspect the battery cables.

3. Check The Connections Of The Battery Cable

Battery cable connections should be double-checked. Check to see if they’re all in the right location and haven’t been loosened or damaged. It’s possible to clean battery wires if they are corroded and broken. If it’s loose, tighten it up, and if it’s damaged, replace it.


If your automobile won’t start and makes no clicking sounds, there are a slew of potential causes for this. You can use the list above to figure out what’s causing it.

What to do in this case is also included. To avoid any more issues, always remember to double-check your work.