Updated at: 10-08-2023 - By: micdot

Overview for Check Emission System Honda Civic Problems

Honda Civic: If you have a problem with your car’s emission system, then this is the post for you. This light on your dashboard did not just show up by itself. There was a reason for it. Fixing the Check emission system Honda Civic 2012 or other Honda models is just as important as fixing any other light on your dashboard that comes on. Fixing any other light is just as important. Most of the time, warning lights show that there is a problem that you don’t know about or want to fix. They can’t be ignored to avoid more problems.

This post will talk about the 2012 Honda Civic check engine light, as well as other Honda models, like the check emission system Honda civic 2013, the check emission system Honda civic 2015, and the check emission system Honda civic 2014, among other things.

I’ll also talk about these things in this post: On Honda Civic 2012, what does “check emission system” mean? How do you reset the check emission system? How do you fix an emission problem? We’re only looking at the emission system problem on the Honda Civic.

To learn more about how to fix problems with your Honda Civic’s emissions system, read the rest of this post. There is a check emission system light on the 2012 Honda Civic. Let’s start by talking about what it means.

What Does Check Emission System Mean on Honda Civic 2012?

The check emission system on your Honda Civic 2012 means that there’s a problem with your emissions system, which means you need to fix it. A check emission system light on your Honda Civic 2012 may come on because of a lot of different things.

Filters in the air need to be cleaned.

Damaged EGR hoses, valves, or pipes can make your car not run as well as before.

hoses in the PVC valves were broken.

Loosen the gas cap.

It has a clogged catalytic converter.

Spark plugs that don’t work.

Use a scan tool to read the trouble code and get the problem fixed.

How to Reset Check Emission System Honda Civic 2012?

If you want to turn off the check emission system light on a Honda Civic 2012, you can do any of the following:

Taking the car to a Honda service center is the first step. There, the car will be checked out by a computer. After having the car checked, fix the problem that was found. The light would go out as soon as the problem was fixed.

Step 2. When the engine is off, use a wrench to remove the positive power cable from your battery with a wrench. Turn on the car for 20 minutes after you leave it. Then, put your key in the ignition and turn it on. Turn off the ignition and connect the positive power cable again. Return to your car and turn on the ignition. The light should go out in a short time.

Step 3. Turn the car on and off three times without stopping, and the light should go out. However, the best way to get a Honda Civic 2012 check emission system light to go away is to figure out what’s wrong and fix it. This would save the car from more damage and save you money. Making things worse by turning off the light is like not taking medicine when you are sick and expecting to get better.

What does it Mean When the Emission System Light Comes on while driving?

When your check emission system light comes on, it means that your car’s on-board diagnostic system has found a problem with your car’s emission control system that needs to be fixed.

Keeping harmful gases from getting into the air is done by keeping them in a closed system that your car doesn’t let them get into the air. People who drive cars have to make sure that they don’t have a lot of pollution coming out of their cars. This includes the gas cap, the fuel tank, and a carbon canister. Your car’s check emission system light will come on if any of these parts fail or if there is a problem with the engine that affects the emission system.

To figure out why the light is on, you can have your car scanned and look at the fault code. You can use this to figure out what’s wrong with your car.

What Does it Mean When a Honda Civic Says Check Emission System?

Honda Civics have Check Emission System lights if there’s an issue with the emission control system. This means there’s a faulty part or something else wrong with the system. Faulty spark plugs or a faulty gas cap could be to blame. If you have a Honda Civic, the problem may be different from a Honda Civic because of the model.

To avoid getting stuck because of the problem, have the Honda Civic checked with a scan tool to read the code and fix the problem.

Fix for Emission System Problem Honda Civic(How Do You Fix An Emission Problem)

If you want to fix an emission problem, you need to know what the problem is. In this list, we’ll tell you how to fix problems with the Honda emissions system and what to look for.

1. Faulty Positive Crankcase Ventilation (PCV)System Hoses

It is one of the most common Honda civic emissions system problems, and it is also called the PVC valve. The Positive Crankcase Ventilation (PCV) system is one of the most common problems. It’s called the Positive Crankcase Ventilation (PCV) system, and it removes gas from the crankcase of the internal combustion engine and moves it to the intake manifold. It has hoses that are likely to get worn and tear. A broken or clogged one can cause the check engine light to come on in a 2012 Honda civic. Check the PVC valve to see if the hoses are broken. If you see any, have it fixed. Check out this video on how to change the PCV valve. The Honda Civic is a car that is made by

2. Dirty Air Filter

The air filter on your car’s air cleaner system keeps dirt, dust, and other things from getting into your car’s engine through the system. The check emission system Honda civic 2013, 2014, 2015, or even your 2012 can come on after a while if it gets clogged up. For this Honda Civic emissions system problem, there are two ways to fix it. In order to fix this, you can either clean the filter or have the air filter changed. Here is a video on how to change the cabin air filter on a Honda civic. My list of the 10 best cabin air filters on Amazon and how to choose the right one for your car might be interesting to you.

How to Clean Honda Civic air Filter

To clean the air filter with a vacuum cleaner:

The best way to clean the air filter in your car is to use a vacuum cleaner to do it. Start by attaching the air filter hose attachment to your home vacuum cleaner. This tool will help you get into the ridges of the filter.

Next, all you have to do is vacuum both sides of the filter for about two to four minutes at a time, making sure that all of the visible dirt and grime is going out. Always keep the filter on bright light so that you can see some of the dirt that needs your attention. It’s time to put the filter back in. Check the filter one more time and you’re ready.

Clean the air filter with water:

If you want to clean the air filter on your Honda civic, you can also use water. The only problem is that it takes a lot longer and takes more time. When you clean your car’s air filter with water, it usually takes a long time, especially when you add in the time it takes to dry. But you will get great results.

It’s possible that you’ll like my YouTube videos, too. Please join me on YouTube by subscribing here, so you can see my new videos when I post them.

Clean water and a small amount of detergent should be put in your bucket to start. Then, wash. You have to turn the filter over on different sides, and then use your hands to remove any dirt and dust from the filter material until it is clean. You’ll then take it out of the water and shake it a little more before you rinse it with new water.

Finally, put the filter on a piece of clean cloth and let it dry until it is dry. According to where you dry it, it may not dry all the way in 24 hours, so make sure you have enough time before you start driving again.

3. Damaged Hoses, Fittings, and Canister of the Evaporative Emissions Control System

The Evaporative Emissions Control (EVAP) system makes sure that harmful vapor from the fuel system doesn’t get into the air. It has hoses, fittings, and a canister that can get damaged and mess with the emission control system. If they’re broken, get them replaced. You can learn how to fix the EVAP system in this post.

4. Loose or Bad Gas Cap

It can let gas fumes out when the car isn’t running, and it also lets fuel evaporate. If the gas cap isn’t tight or broken, this can happen. A loose gas cap can be fixed by taking it off and putting it back on tighter. In this case, if the gas cap is broken, it would make sense to get it fixed as soon as possible. How to fix a loose gas cap is shown in this video.

5. Damaged hoses, Clogged Pipes, and Faulty Valves of the Exhaust Gas Recirculation System

To let exhaust gas into the intake system when the combustion temperature is high, the Exhaust Gas Recirculation (EGR) system is in charge. In time, the hoses and pipes of the EGR can get worn and tear, and the valves can break. You should check the EGR to see if there are any problems and fix them if they are.

6. Damaged Air Cleaner Intake Hose

A second problem comes up when this gets worn down and tears. This hose connects the air filter to the throttle body of the engine and sends air to the combustion engine. Dust and other things could get into the hose if it was damaged. This could cause problems with the engine as well. Buy a new air cleaner intake hose and either fix it yourself or have a mechanic fix it if you don’t know how to do it.

Common cause of Check Emission System Honda Civic 2013

Honda Civic 2013: When the “Check Emission System” light comes on, then there’s something wrong with the EVAP system. This warning light can mean a lot of different things, so it’s not a good idea to just guess. A lot of different parts make up the EVAP system. To figure out which one is broken, you’ll have to check each one very carefully for problems. One way to do this is to scan the car for trouble codes.

For people who own a 2013 Honda Civic, the most common reason for the check emission system light to come on is a faulty or loose gas cap. For a gas cap that isn’t tight enough, you should tighten it to turn off the light. Make sure the gas cap doesn’t have cracks or worn edges. If the light doesn’t go off, look for these things. In that case, your gas cap needs to be changed. You should be done with the check emission system when you replace a gas cap.

Reason for the red Check Emission System Honda Civic 2015 light

The red Check Emission System light that you just saw on your Honda Civic 2015 model could mean that one or more of the following is going on:

Loose or faulty gas cap

Spark plugs and plug wires that don’t work.

A bad or clogged catalytic converter will make your car not run well.

Because the mass airflow sensor needs to be changed,

You need to change the O2 (oxygen) sensor in your car.

ORVR vent tube is leaking and needs to be fixed.

If the light is flashing, you need to fix the problem right away. If the light is steady, the problem isn’t as bad, but it still needs to be taken care of. Always pay attention to a Check Emission System light. Take the car to a Honda service center if you can’t figure out what’s wrong on your own.

What to do when you notice a Check Emission System Honda Civic 2014 light

It turns on the check emission system on your Honda Civic 2014 when it needs to be checked. The first thing to do is to use an OBD-II scanner to figure out what’s wrong with your car. To tell you that there is an issue with your car’s emissions system, the light will come on. Often, the light comes on because of a bad gas cap, faulty spark plugs, loose spark plug wires, or a bad or clogged catalytic converter. If you don’t know how to fix emissions-related problems, have your car taken to a professional who can first figure out what’s wrong and then fix it.

2012 Honda Civic Check Engine Light

The check engine light that came on while you were driving is just as important as any other light that tells you something is wrong. Not at all. It doesn’t mean that you should slack off, stop the car, and have it towed to an auto repair shop right away. If your 2012 Honda Civic’s on-board computer has just found a problem that needs your attention, this means that you need to fix it. There might be a small problem that you don’t need to worry about right away. But no matter how big or small the problem is, having it fixed is the best thing to do.

When the check engine light comes on, the electronic control module (ECM) right away starts recording the problem in the form of trouble codes. This way, you can quickly figure out what the problem was that led to the light.

A lot of things could have caused the light to turn on, such as:

There are problems with the transmission

Problems with emissions control

The gas cap could be loose, broken, or not there.

There is an old or dead battery in this car.

Problems with fuel and air meters

Spark plugs and plug wires that don’t work.

When the ignition system doesn’t work right

The oxygen sensor doesn’t work.

The catalytic converter is bad, and the car doesn’t run very well.

Having trouble with the fuel pump.

Common cause of 2012 Honda Civic Check Transmission Light

It is the check engine light that is the most common light for people who own a Honda Civic 2012. As a side note, the check transmission light is another way your car tells you that there’s a transmission problem.

The main engine computer in the Honda Civic 2012 is in charge of a lot of things, like when the transmission shifts gears. Keep an eye on the check transmission light. It’s a sign that something is wrong with your transmission and you need to get it fixed before there is more damage that costs more money.

In your Honda Civic 2012, what can cause the check transmission light to come on at any time?

Things with the temperature sender.

Transmission fluid is low and needs to be topped up.

Connecting the transmission wiring was broken.

It is easier to keep the transmission in good shape than to fix or replace it. Don’t wait until there’s a problem with the transmission to keep it in good shape.

Start by looking at the transmission fluid level to see if it needs to be changed or filled.

Check Emission System Acura Tl light

They are more likely to show a check emission system light if the gas cap is loose or broken.

As a side note, this is not the only reason why you will need to scan for trouble codes. To see what the check emission system has found, you need to do this.

After you scan for the codes, you will know where to start in order to solve the problem.

Keep in mind that if you tighten or replace the gas cap and the light still comes on, don’t be afraid to have a mechanic run a computerized check-up.

What you should Know about Check Emission System Honda Odyssey 2012

Lights on a Honda Odyssey 2012 will only come on when the sensors have found something that needs to be fixed.

As simple as having a loose gas cap that needs to be tightened or replaced, there could be other issues that need to be taken care of. For example, there could be an EVAP line that needs to be repaired or replaced, or a solenoid valve that leaks, or a carbon canister that needs to be replaced.

If you don’t know how to read the codes, you might not be able to reset the light on your own. You’d need a professional mechanic to help you.

If the code says P0302, for example, a spark plug and a coil are needed, PO455 a large leak has been found in the Evaporative Emission (EVAP) System, PO456, a small leak has been found in the EVAP System, and so on.

A post about Honda civic cars’ emissions problems and how to fix them might have helped you, so I hope this one has been useful to you.