Updated at: 22-03-2022 - By: Lucas

Affiliate links can be found throughout this piece. Using any of the links on this page will allow me to earn a small commission at no additional cost to you.

No matter how hard you try, you can’t keep a good thing going forever. For an automobile to work well, all of its components must be in good working order. This is because there are many parts to a car.

Many drivers pay more attention to the engine bay components than to other parts of the vehicle.

Every car has a plethora of other critical components buried beneath the surface, including the engine and transmission.

To connect the vehicle’s transmission system to the wheels, Constant Velocity joints (CV joints) are commonly employed.

However, what are the repercussions of a CV joint failure? As you may imagine, a damaged CV joint can cause a lot of instability while driving.

What Are The Functions Of CV Joints?

CV Joint Failure Consequences

Bad CV joints can have serious repercussions, but only if you know what they do. CV joints are essentially “joints,” with two on each drive wheel (the inner one and the outer one).

Transmission and axle are linked by an inner joint and an outer joint, respectively, which connects them to the wheel.

It is likely that if one of these joints fails, the other will as well, but this may not occur quickly.

It is the job of CV joints to hang on to the connected components and assist in the transmission of power from the gearbox to the wheels, which is done regularly.

A lack of sufficient lubrication of CV joints can lead to strange indications and sounds when driving, which is why it is important to get your vehicle’s CV joints oiled regularly.

CV joints, in particular, are prone to failure; the following are symptoms that indicate a damaged CV joint.

Signs of a Failing CV Joint

Check your CV joint and any components surrounding it promptly if you detect any of these symptoms.

1. Unusual Loud Clunking Sound

Clanging noises coming from the bottom of your automobile are a classic symptom that something is wrong with the drivetrain.

If you hear strange noises, pull over and investigate.

2. Vibration While Driving

Because the torque from the transmission isn’t getting to the wheel with the defective CV joint, there may be vibrations.

Even if your automobile doesn’t shake, there are a number of other issues that could be to blame.

CV Joint Failure Consequences

A damaged CV joint, like any other automobile part, can lead to a variety of instability issues. A faulty CV joint might produce odd vibrations and, in the worst case scenario, damage to your car’s axle.

What can happen when your CV joint fails? Here’s one example.

In the event that one CV joint fails, let’s assume it’s the inner one, it would force an axle to pull out of its attached wheel, resulting in the axle striking the pavement; this might cause the axle to break, causing your automobile to come to a stop.

However, if the outer CV joint fails, the axle is likely to come apart from the transmission and hit the road severely if you’re driving at the time..

A broken axle would also stop your vehicle from going.

As a result, the axle is the primary target of CV joint failure. The driveshaft or even the associated drive wheel can be affected by CV joint failure.

It is also impossible to fix a CV joint that has broken, so you must replace it with a new one.

What More?

Even while a damaged CV joint is most likely to impact the axle and its surrounding components, there is the risk that it could affect other parts of the vehicle as well.

However, if you notice indicators of a deteriorating CV joint, it’s best to take action before it’s too late.

The most essential thing to remember is to keep a regular schedule for car maintenance and to make sure that any repairs you have done are done correctly and with original parts.

The cost of repairing damaged CV joints is far lower than the cost of replacing an axle or a driveshaft.