Updated at: 05-04-2022 - By: micdot

The cost of repairing or replacing a drive shaft varies, but there is a general rule to follow! For a better understanding, here’s a current guide. If you’re looking for an expert on this subject, you’ve come to the right place. On our website, you may find out more. If your driveshaft isn’t working properly, get it checked out as soon as possible and get it repaired or replaced. We’ll go through the potential symptoms and indicators, as well as the associated costs, in this post. Transaxle and CV joints were highlighted in a previous article on car axle replacement costs for vehicles with front wheel drives. Power and torque must be transferred from the engine at the front to the rear wheels in cars with rear-wheel or all four wheels driven. Everything you need to know about the drive shaft will be explained in the following parts, including the cost of a drive shaft replacement or repair, as well as other considerations.

Let’s get started right away!

List of Chapters

Should You Replace Or Repair A Drive Shaft?

There are numerous warning signs and symptoms that might occur if the drive shaft is malfunctioning. If the drive shaft splits, it’s usually best to get a new one. It’s possible that the U-joint, slip joint, center support bearing, and other nearby components are really to blame. A simple fix is all that is needed in these circumstances.

Drive Shaft Replacement Cost

In most cases, when a drive shaft is changed, all of the aforementioned components are also replaced. The price of a drive shaft varies by vehicle type. Drive shafts for high-performance vehicles and huge SUVs are more expensive than those for sedans and coupes. Drive shafts can cost anywhere from $300 to $1300. The drive shaft for your automobile must be compatible with the exact car model, engine, and transmission in order for you to use it.No more than two hours of labor should be required. A drive shaft replacement usually takes less than an hour in most circumstances.

This indicates that labor and parts will add up to between $400 and $1500. It’s not difficult to replace the driveshaft on your own, which could save you some money. Drive shafts can vary widely between automobile models, transmissions, and engines, so keep that in mind when you’re comparing prices. Drive shaft configurations can be different between two vehicles of the same type if one has a manual transmission and the other has an automatic. When purchasing a new drive shaft, this is not always the case, but it is something to keep in mind.

Drive Shaft Repair Cost

Damage to a drive shaft caused by a split is irreparable. A joint or other component working in conjunction with the drive shaft may be the source of the issue in many cases. If this is the case, a repair is usually possible. In most cases, repairing a vehicle’s drivetrain is less expensive and takes less time than replacing the entire unit. It will cost you roughly $300 to replace a center bearing with new parts and labor. This is also true when it comes to replacing a U-joint. WikiHow has a step-by-step tutorial on how to replace a U-joint.

Symptoms Of A Bad Drive Shaft


It’s critical to check if a drive shaft has to be replaced before making the purchase. It’s impossible to tell the difference between a bent drive shaft and a broken one until the shaft has snapped in half. A faulty drive shaft might be spotted by looking at the following symptoms.

Noises Under The Car

Under the automobile, a clunking sound may indicate that the U-joints are defective. There are many sections and joints in the drive shaft that can make noise if they don’t work properly.


Additionally, excessive vibrations could indicate a problem with the drivetrain. Concerning noises could also be the source of this. Vibrations can be caused by an uneven driving shaft. If the shaft is just imbalanced and not bent, it is a simple fix that should not exceed $300. Even though the ignition coils or spark plugs may appear to have a problem, the drive shaft is the real culprit in the shaky acceleration. Is Your Car Jerky When It’s Trying to Accelerate? The Solution Is Here.

Car Will Not Move

A rear-wheel-drive vehicle will not be able to move if the power is not transmitted to the rear wheels. A problem with the car’s drive train may be responsible for its inability to move. Attempting to drive a vehicle with a defective drive shaft might result in loud noises, as the shaft continually impacts the vehicle without it moving.


5 Symptoms Of A Bad Driveshaft (& Replacement Cost)

Cars with rear-wheel drive typically have a drive shaft. Its primary function is to distribute the engine’s output to the back wheels. Two drive shafts may be used in four-wheel-drive vehicles, one in the front and the other at the back. Transaxles and CV joints are standard equipment on front-wheel-drive cars since the engine is located so near to the wheels it powers. Repairing the drive shaft is often enough to fix any issues that arise with the drive shaft. The U-joint, center support bearing, slip joint, and other components related with the driving shaft are included here. The drive shaft in your car may not look or have the same components as others, so it’s critical that you check it thoroughly. Depending on the sort of transmission, engine, and drivetrain you have, the drive shafts can even be different on the same model of the vehicle. This implies that you must utilize a drive shaft that is specifically designed for your vehicle.

The price of drive shafts varies substantially due to the wide range of options available. A replacement drive shaft might cost anywhere from $300 to $1300. The good news is that it only takes an hour to replace. Even while repairs are normally far less expensive, they can still cost up to $300 for labor and parts. The sooner a drive shaft is repaired, the better off you and your vehicle will be. There may be vibrations, noises coming from the underside, and a car that won’t move.