Updated at: 13-08-2022 - By: Lucas

For those who prefer listening to the radio while on the road, the Honda Accord is a popular choice. Error E might be frustrating, but what do you do if you can’t listen to your favorite stations because of it?

Let us take care of the reset for you. To fix the Honda Accord radio code E, we’ll walk you through the steps in this blog post.

Disconnect the black negative battery connector for one to three minutes when the radio displays error code E. After you’ve turned the radio back on, look for the word code and input the five-digit radio code to get it working again.

What You Need To Know About The Honda Accord

Honda Radio Code Error E

As one of the best-selling cars in the United States since 1989, Honda’s Accord has been a line of cars produced by Honda since 1976. The four-door sedan version is the most popular.

Coupes, wagons, hatchbacks, and even a crossover have all been given the Accord brand over the years.

Features like Apple CarPlay and Android Auto compatibility as well as satellite radio and HondaLink may be found in the most recent models of the Honda Accord. The goal of this system is to make driving more pleasurable and convenient for you.

What Is A Radio Error E?

E is a general protection fault code that signals a problem with the car’s audio system. This can be caused by a number of causes, including a loose connection, a system accessory, or a software issue.

How To Reset The Honda Accord Radio Code Error E

Honda Radio Code Error E-2

There are two possibilities: either the battery has died or you’ve just installed a new one. To get it working again, you’ll need a radio code that you may get from the Honda databases.

Even if this is your first time, you won’t have to spend much time on it if you follow the instructions below:

1. Get The Serial Number

To begin, look for the radio’s serial number on the back. To find this information, look for a sticker on the radio unit’s outside. In order to get the radio code for your Honda, call Honda customer support at 800 999 100 Nine.

When you call, make sure you have the necessary information ready:

  • The serial number of your radio
  • Your vehicle identification number (VIN)
  • The phone number where you can be reached

You will be asked for this information by a customer service representative in order to authenticate your identification and retrieve the radio code for your car.

2. Put the Car On Auxilliary Mode

Press the AUX button on your radio to activate your car’s auxiliary input. To enter the code, switch the radio to the auxiliary mode.

Look for a button labeled MODE or SOURCE if you don’t see an AUX button. You can press this button to cycle through the various modes until you get to the auxiliary mode.

Alternatively, if you don’t want to start the engine, you can put the car into accessory mode by turning the key to the ACC position. This will allow you to enter the code while the automobile is still running.

3. Turn The Radio Off

Switch to auxilary mode and hit PWR or POWER to switch off your radio. In most cases, this can be found on the radio’s face.

4. Turn The Radio On

Press the power button with your free hand while holding the numbers 1 and 6. The display will show the serial number of your automobile radio.

5. Input the five-digit code using the preset buttons on your radio.

An individual button’s initial digit corresponds to its first pre-set number. If your code is 43679, for instance, pressing 43 would be the appropriate response..

Once you’ve entered all five digits of the code, release the one and six buttons. You should be able to use the radio again as soon as it’s turned back on.

Are there other methods for resetting the error E code?

Honda Radio Code Error E-3

Resetting the code on your Honda radio can be accomplished in a number of different ways. It is advised to reference your owner’s manual or contact a Honda dealer for more exact advice on how to perform these procedures.

Disconnecting the battery and re-connecting it after a few minutes is one option. The radio will be reset, allowing you to enter the code.

The radio’s power button can also be held down for at least five seconds to reset the device. The radio will be reset, allowing you to enter the code now.

Do I have to reset the radio every time I disconnect the battery?

There is no reason why you should have to perform a factory reset each time you remove the battery from the radio. When you change the battery or the radio loses power for whatever reason, the code is often necessary.

It’s possible that your battery or electrical system is malfunctioning if you constantly have to reset the code. Diagnosing and fixing the issue is best left to a Honda dealer or certified mechanic.

Are There Other Error Codes for Honda Radio?

Other problem codes can appear on your Honda radio. A variety of solutions will be needed to address each of these codes. The following are some of the more often occurring error codes:

Code B for an error.

If you get this code, your vehicle’s battery is running low and needs to be recharged.

The audio system in your car may be malfunctioning if you see Error Code P.

Exception U.

This code indicates a problem with the USB port in your car.

It’s recommended to consult your owner’s handbook or a Honda dealer if you observe any of these error codes or any others that we haven’t highlighted.

Other Frequently Asked Questions On Error Code E

How do I know if my car radio has an error E code?

The error E code on your Honda radio indicates that the device is locked and requires a five-digit unlock code to be input.

Where can I find the serial number for my car radio?

Your automobile radio’s serial number can be found on the face or side of the device.

I cannot find my car owner’s manual. Where can I get more information about resetting the code on my Honda radio?

If you’re unable to locate your car’s owner’s handbook, speak with a Honda dealer or a knowledgeable mechanic for assistance. The Honda website is also a good source of information.

Do I need to enter the code every time I turn on my radio?

The code should not be entered every time you switch on the radio. When you change the battery or the radio loses power for whatever reason, the code is often necessary.

What do I do if I see other error codes on my Honda radio?

On your Honda radio, you may see various problem numbers. A variety of solutions will be needed to address each of these codes.


We hope this post helped you understand how to reset the Honda Accord radio code E. Feel free to get in touch if you have any other concerns or questions. We’d be delighted to lend a hand.