Updated at: 10-08-2023 - By: Lucas

You’re trying to open the door to your car when all of a sudden, your key won’t work.

What will you do if your key fob won’t work anymore?

Well, calling a locksmith would be the easiest thing to do.

To programme a key fob, most locksmiths charge between $50 and $100. The fee may go up or down depending on the type of key and whether or not the fob needs to be replaced.

A professional locksmith should be able to help you re-program your car’s key fob.

They have the tools you need to change how it works.

Plus, if the problem is the battery, they can help you change it.

Can a Locksmith Program a Key Fob?

How Much Does A Locksmith Charge To Program A Key Fob-2

It’s bad enough to lose a key, but it’s even worse when it doesn’t work. A locksmith can help you re-program your key if it doesn’t work.

Someone might need to do this with their key fob for a number of reasons. You could have lost it or it could have died.

No matter what, if you want a locksmith to fix it, you’ll need a few things.

Make sure you’re carrying the key fob when they get there. To do anything, they’ll need it. Most locksmiths won’t help you unless you have proof that you own the lock.

Most of the time, you can show them the title to your car to prove that you own it.

Once they’ve seen it, they’ll help you connect the fob to your car.

You can tell them to meet you at your car, so they’ll come to you. They will talk to you when they get to where you are, so wait there.

When they get there, you can ask them how long it will take.

Most of the time, reprogramming a fob takes a few minutes, but sometimes it takes longer.

Cost to Program a Key Fob

When people need to replace their fobs, the cost is one of the main reasons they don’t go to dealers.

If you lose your fob, going to the dealer is often the most expensive way to get a new one.

If you go through the dealer, you could end up spending several hundred dollars.

This is why people often call a locksmith when they need new fobs.

They have lower prices than most dealers, so you can save money by buying from them.

How much it will cost to re-program a fob depends on a number of things.

If you need a new key fob, some cars cost more than others.

You can’t programme a key fob if you don’t have the right tools, either.

You should plan on spending at least $50 on it. But it could cost you up to $250 to get a new key fob. Most of the time, getting one from a dealer will cost more.

I think you should hire a locksmith if you want to save a little money. Even on new cars, they can usually programme a key fob for less than $100.

Because of this, you can spend less than half of what you would at a dealer.

It will cost you more than that if you have a proximity key. These have sensors that tell the car when you’re close.

So, if they break, it will cost more to get a new one.

If you have a proximity key, a new one could cost you up to $500.

Because it doesn’t use as much technology, a transponder key is cheaper. You shouldn’t have to pay more than $150 to replace one of them.

But if you have lasers cut the key, it will cost more.

Lastly, a key for a switchblade will cost you between $200 and $300. When not in use in the car, these fold up into a small rectangle.

To open them, you just have to push a small button.

Most of them have a fob built in as well.

As long as the locksmith has the right tools, he or she should be able to programme the fob.

Programming it shouldn’t be as expensive as programming a remote key.

It might be enough to just put a new battery in your key fob. If this is true, you won’t have to spend as much.

If you’re lucky, a new battery might only cost you $10.

You also don’t have to call a locksmith to change the battery in your fob. Just open it and look inside to find out where the battery goes.

Once you’ve bought a new one, throw out the old one.

After that, you can put the new one where the old one was.

After you put in a new battery, it should work like before.

You can use the key outside the car to see if it’s the battery.

As long as the car works, putting in a new battery should have been enough.

Can You Program a Key Fob on Your Own?

How Much Does A Locksmith Charge To Program A Key Fob-3

You might think that paying someone else to programme the fob is too expensive. You can do it yourself if you want to spend as little money as possible.

You’ll also need to buy the tools you’ll need to programme them. If you don’t have the right tools, you can’t change their programming.

Most of the time, you can connect them to an OBII port scanner to see how they are coded. But if you want to programme them yourself, you’ll need a certain tool.

Check the manual for your car to see if it lists the right tools. You can look them up online if that’s the case.

Then, order a key fob so you can programme it yourself.

Most of the time, it costs more to order the equipment than to buy it.

You might not want to programme a key yourself if you’re not going to do more than one.

If you only have one key, it would be cheaper to hire a locksmith.

Replacing the Key Fob on a Keyless Start Car

A keyless start car doesn’t need a normal key to start it. They have done away with them by using a remote start module.

So, when you get in the car, you don’t have to put anything in the ignition.

It’s not too hard to replace the fob on a keyless-start engine. Make sure that they are using the right codes.

That’s how they can talk to the engine’s stop-start device.

When you get in the car, the transponder on the key talks to the engine’s immobiliser to turn it off.

If you need a new key, you’ll have to work with a locksmith.

If it doesn’t, it won’t have the right codes to turn it off!