Updated at: 01-04-2022 - By: micdot

When driving in the dark or through thick fog, your car’s headlights need to shine brightly. To ensure that you and other drivers have the best visibility possible, you need a set of high-quality headlights. If you want to be on the safe side, investing in LED headlights is a smart move. Even if your automobile didn’t come with these headlights when it was new, you can get them installed in practically any make or model. How confident are you in your DIY skills when it comes to putting in LED headlights? The following procedure can be used to install your new LED lighting:

Choosing the Best Equipment

Set the Stages for the Installation.

Pulling The Plug On The Headlights

Headlights should be installed.

Assembling Ballast

Secure the Ballast.

Take a Look at Your LED Lighting Options

A dimming or outright burning out of your vehicle’s headlights should not be ignored. You should avoid driving at night if your headlights are in this condition. This means that you should check your car’s headlights for signs of wear and tear, fading, or even cracks. Replace them if they are no longer as bright as they once were and are therefore no longer as safe for you.

What Are LED Lights?

You can see where you’re going thanks to the utilization of LED lights. Longevity and light output are the primary goals of these lamps. As a result, the amount of light emitted by the headlights while driving is highly efficient and effective. If you’re going to be driving at night, you’ll want to get one with a high lumen capacity, which depends on the sort of vehicle you have. With LED headlights, you will notice a noticeable difference in brightness compared to traditional lighting equipment.

In terms of pricing, these lights are a little on the pricier side, but in the long run, they’ll save you money in the long run. To help you choose the best LED headlights for your vehicle, check out this post now!

Things To Be Mindful When Installing LED Headlights

There are a few things to keep in mind before installing LED headlights. This is due to the fact that some of them emit excessively strong light, obstructing the vision of other drivers. If the LED lights you intend to use are compatible with your vehicle, the next step is to find out how much they cost. Some of these items may not fit in your vehicle due to their size or even their shape being out of proportion. The LED lights may also necessitate enough ventilation in order to keep the heat generated when the headlights are turned on in check. In contrast to the typical headlights, this type generates a significant amount of heat.

LED lights should not have any plastic around them since the excessive heat they emit while operating could melt the plastic.

What You Need to Know About Installing LED Lights in Your Car or Truck

Tools To Need For Replacing LED Car Bulbs

Installing new LED lights on your vehicle will require the use of the following items to ensure that the process goes as smoothly as possible. You’ll be safe and the headlights won’t get harmed this way. In addition to this, you’ll need:

Driver with a flat head

Cotton gloves or a clean towel will do the trick.

7 Easy Steps DIY Guide To Installing LED Headlights

If you don’t want to try and do the task yourself, an expert or technician may be a choice. It’s possible that you’ll pay for a service that you could have done yourself. Installing new LED lights on an automobile is as follows:

1. Getting The Right Kit

LED headlights come in a wide variety of styles, and some may not be suitable for the vehicle you drive. Depending on the style of lighting you are used to, some LED headlights may not be the best choice for you. A single beam or dual beam headlight is an example of this. You can only obtain one of them from a single beam: either a high beam or a low beam. There are two bulbs for each function in a headlight assembly. It’s possible to get both a high and a low beam using the dual beam.

2. Set Up For The Installation Process

To begin, take note of or better yet, carefully inspect the sort of headlights you currently have on your vehicle. You can accomplish this by setting your car’s headlights to “on” and backing away from the garage. Make a note of each of the beams from your car’s headlights next. Masking tape, duct tape, or insulating tape can all be used to accomplish this. The wiring of the headlights must be protected at all costs to avoid requiring the services of a technician or expert.

There should be no danger to the ballast as well. Before any other action is taken, the ballasts can be secured using drilling tools or a number of self-tapping screws.

3. Taking Out The Headlight Bulbs

Afterwards, you can remove the headlights. When it comes to accessing the headlight, there are many ways to do it depending on the make and model of vehicle. Headlights may be removed from most cars by opening the hood and gaining access to the headlights. Taking the cable that connects the headlight bulbs to the car’s electronic system will be the following step. Using a flat screwdriver is the best way to accomplish this task. Gently flip the bulb until it’s free, and you’re done. Pressing the tensioned wire until it’s unlocked is the best way to remove the metal base from the set of automobile headlights.

Using this method, the headlamp may be simply removed.

How to Replace a Headlight Bulb (Tips and Tricks) - YouTube

4. Install The Headlights

The installation of your new LED headlights is the fun part now that the hard portion is over. If you don’t have a fresh pair of gloves, you’ll need to use a clean rag. It’s best to wear cotton gloves when handling bulbs since they will protect your skin and keep the bulbs from being damaged when you touch them with your hands. Make sure nothing, not even your fingerprints, is left on the car’s headlight bulbs. To avoid damaging the entire set of car headlights, avoid connecting the bulbs too tightly.

5. Connection Of The Ballast

Attach the ballast’s end to the bulb, and connect the other end to the electronic wiring of the vehicle. The electrical circuit must be completed in order for the car’s headlights to work when the switch is turned on.

6. Secure The Ballast

There should be a level surface where the ballast is put to prevent it from leaping or banging into other objects. While driving, this could be dangerous if you don’t put it in a safe location. The ballast can be held in place using a drill or self-tapping screws.

7. Try Out Your Light Emitting Diode (LED) Lights

Once you’ve completed the procedure of installing new LED headlights, you’ll just need to make sure you did it correctly.This can be done by turning on the ignition and turning on the headlights of your car. As previously, the vehicle should be able to illuminate the same area. In other words, this is were your taped-up marks were. If you park the car exactly where you did previously, the beams should be in the same spot. If there is a deviation, you should make corrections until the beams are in the same spot.

In addition, this well-known YouTuber illustrates how:


Your car’s LED headlights: did you know how to do it? These queries are frequently asked by others who are dealing with the same problem as you. Continue reading if you’re interested in finding out more!

Why Is It A Good Idea To Convert Halogen Headlights To LED Headlights?

LED vs HALOGEN HEADLIGHTS!! [Before and After] - YouTube

In addition to being used to illuminate houses and sports fields, LED lights are becoming increasingly common in automobile headlights. Headlights on automobiles may be better equipped with LED lights, which are more efficient and last longer than halogen lights.


Increase your life expectancy.

Is a powerful and efficient tool.

Are you sufficiently bright?

Designed to be visually appealing and distinct from other possibilities, which is a significant advantage over the competition. Customization is an option.


Is it pricey

You’ll need a cooling component if you generate too much heat.

Manufacturers put a lot of effort into designing it.

How Long Does It Take To Install LED Headlights?

Your LED headlights should be installed in less than half an hour whether you hire a service or do it yourself. An experienced specialist might complete the task in less than twenty minutes, however doing it on your own will take a significant amount of time depending on your level of expertise. During the course of the entire process, you may encounter difficulties that will delay you.

Can I Put LED Headlights In Any Car?

There is no way to fix LED headlights on any vehicle. This is due to the fact that some vehicles lack the necessary headlight space. You’ll also have to adhere by the rules because some LED lights can be too bright and interfere with the visibility of other cars on the road.

Check with your mechanic or expert before purchasing new car headlights because there are a lot of things to consider. To prevent purchasing LED car headlights that might not even fit in the position of the headlights, this would be a good thing to do.

How Much Are LED Headlights?

Each set of LED headlights will cost no more than $100. The price is determined by the type of headlamp you choose, as there are a variety of options. Because some LED headlights are more beautiful or even constructed differently, their pricing might vary widely. If you want to replace your current headlights with the new ones, you’ll be charged between $70 and $150.This is largely determined by the vehicle you drive. As a result of the difficulty in accessing the headlights of some vehicles, you may be charged more for the service.

Where To Get LED Headlights Installed If You Don’t Want To Do It By Yourself

Professional installation is an option if you need to focus on other duties or can’t get your car’s headlights converted to LED headlights.If you find yourself dealing with issues with your headlights on a frequent basis, you may benefit from the services of a professional. This is due to the fact that they will be able to identify and address any problems that arise.Not only can an expert install LED headlights, but they can also fix any other problems you have with your headlights.

These include issues with misty headlights, yellowish headlights that aren’t bright enough to light the road effectively, and other issues.

How To Install LED Headlights In Your Car: EASY STEPS & VIDEO

Pep Boys Is The Place Where You Can Get Your LED headlights Installed

Car auto parts retailer Pep Boys provides this service for your vehicle’s headlight bulbs.Customers may expect to receive a high level of service from their professionals, as well as a positive experience overall. Headlight cleaning is one of the many services that we provide.They also upgrade your headlights to LED lighting that will make nighttime driving safer for you. There are a wide range of LED headlamp designs to pick from as well, which will enhance the aesthetics of your vehicle. Installing new automobile headlights won’t set you back more than $100 at Pep Boys.


When it comes to nighttime driving, nothing beats an LED headlight upgrade. That beautiful look and visibility means that other drivers on the other side of the road can see your vehicle clearly.The cost of upgrading your car’s headlights to a more powerful set can be prohibitive. It is bet ter to be safe than sorry.For those who choose to save money, my guide on how to replace your headlights with LED s, which you can find at the top of this page, will also help you stay safe while driving in low light or dense fog.