Updated at: 25-04-2022 - By: micdot

Are you having a power window repair problem? If your car driver side window won’t roll up, or if your car power window goes down but not up, I’ll show you how to fix them quickly. No matter how high or low your car window goes, getting a stuck window can cause a lot of stress and trouble for the person who owns the car.

How to fix a stuck car window in general, how to manually roll up a power window when your car automatic roll-up or electric window does not work, and what to do when your car power window goes down but not up by itself.

Anyone can figure out why your windows won’t roll up, no matter if you have manual or power windows. To help you do this, here are some tips. First, let’s learn about how a car window works. This is a list of the 7 best anti-fog windshield treatments and the best anti-fog glasses cleaner.

How Do Car Windows Work?

A regulator is used to roll up or down a car window.

When you open a manual window, it has a regulator that can be physically connected to the cranks. The crank is used to move the window up or down. Electric windows use motors to control their regulators, but they work in the same way. It’s because electric and manual windows have different parts that can break down for different reasons, so they can also break down for different reasons.

A reversible motor and a regulator are used to raise or lower the glass on electric windows in cars.

This is why a power window can go down but not up when all of the switches, wiring, and motors break down. The regulator can also become stuck or malfunction, which in simple terms results in a power window that goes down but not up some times.

In order to open or close a car’s windows, a hand crank and a mechanical regulator are used.

The crank and regulator gears can get worn down, and the regulator can bend or break down. It can also get stuck if the grease dries up.

Why will a car power window goes down but not up

Car windows can be hard to work with, especially if they’re electronic and not hand-rolled like vintage designs. If your car window doesn’t roll up or down, there are a lot of different reasons for this. Some of them:

An electrical control for the window won’t work because a fuse has blown, so it won’t work.

To start with, this is a big reason why the driver-side window won’t roll up. This is why.

A child safety lock could be to blame for the driver’s side window not being able to roll up.

Window motor is broken. The window switch works as it should. This can be heard when the window switch is pushed up or down.

Poor construction or problems with the voltage could make the switch not work right, which would be bad.

It looks like the door of a car has been scratched or dented after an accident. It stops the window from rolling up, even though the motor is working.

It could also be that snow and ice have blocked the window slots, making it impossible for the window to move.

If your window doesn’t roll up, or if it gets stuck and can’t go down, there are a lot of things that could be going on. However, you don’t have to be afraid. There are many ways to solve this problem, just like there are many root causes and we will talk about that soon.

Power Window Goes Down But not Up Diagnosis.

When your window motor isn’t working, you should look for signs that it isn’t. To figure out why your car window won’t roll up or down, you’ll need some special tools. There are two things you’ll have to take out to test everything. Several things you can do before going any further.

The voltage gauge can help you figure out if your window motor has broken down.

It can be found on some cars. It will usually show 12 to 13 volts when the car is turned off, but this can vary. If the engine is running, more will show up. Even though it isn’t perfect, it gives a good look at whether the charging system works.

You might be able to use your dash voltmeter to figure out if your window motor switch is broken.

It’s important to turn the car accessory key to get the gauges and dash lights to work, so do that.

Switch your window switch.

Keep an eye on the voltage meter to see if the needle on it moves.

If your voltage meter moves even a little when you push the window switch while the engine is off and the motor is on, it means that the electric window motor has broken down and doesn’t work. In this case, the motor might be broken.

Take a look at this: How to Unfreeze Windshield Washer Fluid (windshield washer fluid frozen what to do)

It could also be bent, broken, or stuck. A regulator can be bent, broken, or stuck only when you remove the door panel and check it every so often. Unless you have all the tools to do this, you’ll need to hire a pro.

How to Check for Power at a Car Window Switch


Unless you have special equipment or know-how, you can’t do any more tests.

If you don’t have tools like a voltmeter or aren’t sure you can work on your car on your own, you should take it to a professional.

In order to make sure the power window switch is working and connected to the ground, you can use a voltmeter.

A lot of these switches have one power terminal, two ground terminals, and two terminals that connect to the motor, so they can turn on and off the motor.

You will find power at one of the terminals if your car’s switches work this way.

Terminals with ground should be on two of them, and terminals without power or ground should not be on them.

In theory, if you push the switch in one direction, one of the terminals should get power and the other one should get ground.

To change the order of which terminal has power and which one has ground, you should push the switch the other way.

It’s possible that you’ll like my YouTube videos, too. Please join me on YouTube by subscribing here, so you can see my new videos when I post them.

If your switch doesn’t work the same way as the one you bought, it might be broken.

If the switch doesn’t have power, ground, or both, there may be a problem with the wiring.

It’s important to check the wiring that goes through the door. They could be crimped or broken, so they need to be checked first.

how to manually roll up a power window

Roll the power window up and the motor will stop. Then, it starts to rain. How will you get the power window up without getting wet? There is a simple way to save your hair and furniture.

Here is a power window wont go up quick fix

Step 1: Make sure the door doesn’t move on its hinges.

Turn and open the door.

The door will now separate you from the rest.

Keep the glass between your palms.

At least you should be able to grab the window between your palms. You may not see much of the window.

Place one palm inside and the other outside.

To grab the glass between your hands, your palms should be together.

While holding the glass, slowly move your palms up.

People shouldn’t slip their hands on the glass.

This may take a while, but in the end, the gears on the motor will start to move and the window will move up because of your moves.

Push the top of the window into the seal.

To seal the window, put your hands near the top of it.

The rubber seal at the top of the glass and the gear mechanism should keep the glass in place.

Is there a power window won’t go up quick fix

When a manual window is stuck up, there is no quick or easy way to push it down for a short time, like with power windows. It’s true that you can pull the window into place, but it could make the problem even worse.

Because your window won’t roll up, you’ll need to take out the crank and the door panel.

Pay attention to how it feels to turn the crank. If the crank doesn’t turn smoothly or feels like it’s grinding, it may have teeth that are not there. Take the crank apart and look at it from a distance. You can change the crank if the teeth have been taken out.

As long as the crank is in good shape, you can take off the door panel to look at things like the regulator and the window. Make sure that the window isn’t pushed out of its place. This is important. Then you can roll it up.

Grease can sometimes dry out or the regulator can get stuck to something, so it’s possible. These problems can be solved by either taking the regulator out or adding more grease.

how to get electric window up when stuck down

There are two waysthat you canroll up a power window that has stopped working.

If the switch is in good shape and the motor isn’t broken, you might be able to get the power window to roll up by holding the switch closed or up, depending on what the cause is.

This is how to open a stuck electric window without having to use any tools at all.

To start the car, the ignition key should be in the “accessory” or “on.” Were you able to open every window and turn on your stereo? If so, you’ve got it right.

Hold the window switch in either the up or down position, so that it doesn’t move. You must keep the button down and push the side that closes your window at the same time.

Keep the window button down. Open and close the door. It doesn’t have to work the first time. The button should keep being pushed if it does what it says. The window should come out.

You should not roll the window up unless you are ready to fix the problem. You should not do this. If you use this short-term solution again, it may not work the second time around.

Find a spot where the door panel looks like it’s in contact with the sheet metal. If the window doesn’t roll up after closing the door, look for that spot.

If you don’t know where to look for images of cars with their doors off, you can look for them online.

Press the button. As soon as you’re done, hit the spot with your hand. Take care not to damage your door or the switch.

As long as it doesn’t get any worse, you can leave the window open. A bad switch or fuse could be to blame if the window doesn’t move. You could also take your car to a mechanic for help.

The Window may be out of its track

It could be a sign that your regulator isn’t working right if you can hear the motor running or if the window makes a grinding noise when you roll it up.

If the window isn’t all the way down, you might be able to roll it.

To move the ignition key to the accessory position, turn it to the right.

The window is between your hands while the door is open.

A person who helps can push the window switch.

In order to lift the window up, use your palms to push it open.

You may have to grab the window from the top to get enough force. Make sure you do this because the window might move on its own. Make sure you don’t get your fingers stuck when the window shuts down.

It won’t close if you can feel the window sliding down and the glass is squeezed when you roll it up. If you can get the door panel off, you might be able to lift the window from the inside.