This article contains affiliate links. If you click on any of the links and make a purchase, I may receive a small commission at no additional cost to you.
Once you get past the novelty of rear car window decals, you begin searching for “how to remove stickers off the interior of the rear car window.”
They can arise from a time in your life or your children’s amusement on a long road trip, or even just their desire to have a beloved cartoon character or state park registration sticker on the back window.
Old stickers, in general, can be an eyesore and an issue when it’s time to sell your automobile. This is the bothersome part. There is no need to be alarmed, since there are several effective and safe methods for getting rid of them.
How To Remove Stickers From Inside Rear Car Window
The process of applying and removing rear window decals is far more straightforward. Because the stickers have been exposed to temperatures ranging from hot to cold, they’ve developed a yellowish hue.
Window stickers are nearly impossible to remove without a struggle because of the sun’s heating of the adhesives on the sticker, followed by the cooler night temperatures.
Rear-window decals can be removed using a variety of procedures. Some of these techniques include, but are not restricted to, the employment of:
Soda bicarbonate with vegetable oil
Remover of adhesive
Water that is too hot to drink
For removing stickers off car windows, we recommend using a razor blade and adhesive remover, but you can also use the following.
Because they’re both risk-free and highly effective, these are the two approaches we propose. If the other procedures aren’t utilized correctly, they could cause harm to the car’s windows and trim.
It’s possible that these damages are even more problematic than the stickers on your rear window that you’re attempting to erase.
How to Use Adhesive Remover to Remove Rear Car Window Stickers
Read the labels on the adhesive remover you choose to make sure it won’t damage the paint or the window tints on surfaces like a rear automobile window.
Remove any grime from the window using a microfiber towel and a car glass cleaner. Apply a generous amount of adhesive remover, or follow the manufacturer’s instructions, to the sticker and let it sit for five to ten minutes.
Once the adhesive remover has weakened the sticker sufficiently to remove it, use a plastic scraper from your kitchen to scrape it off. Choose one that won’t leave a mark.
In the absence of a non-marring plastic scraper, it is possible to scrub the sticker with a folded paper towel. Scrub from a corner of a folded paper towel, then work your way toward the center.
Scrape or scrub until the sticker and any remaining glue are gone. Afterwards, use a microfiber towel and auto glass cleaner to clean and buff the glass.
It’s not the most convenient procedure, but it’s safe and effective, and it doesn’t leave behind a sticky residue. For this procedure to work, you’ll need to be patient because it involves a lot scraping, scrubbing, and cleaning.
In order to avoid damaging surfaces like car seats and doors with the adhesive remover, as the stickers are being removed from the inside, a surface test should be performed.
An even better option is to cover the surface with an old cloth or towel to keep the adhesive remover away from the car.
If you’re impatient or just don’t want to deal with the stickiness, you may always use razor blades, which is a completely safe alternative.
There is no need to be alarmed.
How to Use Razor Blades to Remove Rear Car Stickers
Get a razor blade that hasn’t been used. A rusted blade might scrape the glass and do more harm than good if you’re trying to remove a sticker from it.
To prevent scratches, use a car glass cleaner to thoroughly clean the glass.
To facilitate the blade’s movement over the glass, liberally lubricate the region around the sticker with glass cleaner. If necessary, reapply the glass cleaner.
Using a 45-degree angle, hold the razor blade against the glass and slowly glide it towards the sticker. Begin in a corner and make your way toward the center one step at a time. To remove the sticker from the glass, simply use a razor blade to cut through the adhesive backing.
Reapply the glass cleaner and use the freshly cleaned razor blade to remove the remaining adhesive after the sticker has been removed. Before buffing the glass, use a microfiber cloth and a small amount of glass cleaner to clean the area one last time.
Rear-window stickers can be easily removed by cutting them off with a razor blade, even though the thought of doing so makes you squirm. Avoid cutting yourself. Box cutter blades are recommended for this task.
If you’ve tinted your rear glass, you should avoid removing stickers with a razor blade. Scratching the window tint will certainly result in permanent damage.
Make sure you don’t touch the inside of the automobile with the blade because it could pierce the fabric, leather, or any other material it’s made of.
Even while we don’t endorse any of the other ways for removing rear window stickers mentioned above, some of them may cause more harm than good.
On the other hand, we can’t entirely banish them because household materials like baking soda, cooking oil, ice, and hot water may be used in these procedures by some people in some circumstances.
Other Rear Car Window Sticker Removing Methods
1. Rubbing Alcohol
After cleaning the glass, add rubbing alcohol, and peel away the sticker. Afterwards, use a scrubbing brush to remove all of the glue from the glass. This is a great time to use a different side of the cleaning towel to brighten things up.
Damage can be done to paintwork and other surfaces that aren’t adequately diluted with rubbing alcohol. The recommended concentration should be used.
2. Baking Soda and Cooking Oil
Apply generously to the sticker after thoroughly mixing baking soda with a frying oil of your choice. Remove the sticker by scrubbing it with a toothbrush and a paper towel until the adhesive comes off.
A micro-fiber cloth and glass cleaner are all that is needed to get the area sparkling.
Remove as much of the sticker as you can by gently peeling it off. WD-40 the remaining stickers and the adhesive residue, then wait a few minutes for the WD-40 to dry. Wipe away the spray with a moist cloth when the preset time has expired. If cleaning is necessary, do so.
Isn’t it true that the simplest things may have a big impact? When it comes to getting rid of car window decals, would you have ever considered to try using ice to accomplish the job?
For a few minutes, place a bag of ice on the back glass of your car, just as you would if you had hit your head or been injured in any other way. This cools down the glue, making it easier to remove..
Wipe the surface thoroughly with a microfiber towel to remove any remaining adhesive.
5. Hot Water
Put some liquid soap and hot water in a bottle or other container and shake it up. Rinse off the sticker with hot water and let it to soak for a bit.
Gently remove the sticker by wetting it with hot water until the adhesive is loosened. Use a clean towel and automobile glass cleaner to clean and buff the surface.
Due to its affordability and accessibility, I do not suggest this method because one is at risk of being scalded by extremely hot water. Burns can be difficult to treat.
Hand dryer, warm water, and paper towels are all you’ll need for this approach.
Turn the hand dryer on to the highest setting possible. ‘ It’s also an option to utilize a heat gun. For about a minute or two, hold it above the sticker. Quickly remove a corner of the sticker from the glass, then slowly remove the sticker from the surface.
Remove the residue by scrubbing the surface with warm water and a paper towel.
This means that effective methods for removing stickers from the interior of a rear car window are essential.
The majority of the techniques described here are simple, safe, and successful.
Some of these can cause permanent harm if mistreated, so be careful.