Updated at: 04-04-2022 - By: micdot

If you’ve got window tint on your car and want to remove it, this is the definitive method for you. If you’re looking for an expert on this subject, you’ve come to the right place. On our website, you may find out more. It’s a good idea to have a window tint installed on your vehicle. In addition to increasing the aesthetics and adding a little bit of privacy, there are other ways to protect yourself from the harmful UV rays. If the tint isn’t up to snuff, you’ll have to replace it anywhere between five and 10 years down the road. Discoloration, peeling, or bubbling may be among the most common symptoms. To avoid a large charge, you may need to remove your tint if it is too dark for the laws in your area.

Window tint removal is actually quite simple if you know what you’re doing. There are a few things you’ll need, including a hairdryer, a razor blade, some glass cleaner, and an old shop towel. Fortunately, we’ll go through three simple methods for removing window tint in this post. But before we get into the specifics of window tinting, let’s go over what it is and how it works. In order to avoid any misunderstandings, let us first define window tint.

List of Chapters

Window Tint Explained

Dyed, metalized, carbonized, and ceramic tints are just a few of the options available today. There is an adhesive to hold it to the glass and a polyester foundation for each one.

How To Remove Old Tint From Front Windows--Any Vehicle - YouTube


For aesthetic reasons, dyed is the most basic. However, it will also provide some additional seclusion while also lowering the temperature inside the vehicle. It’s the cheapest option, but it’s also the least long-lasting.


After colored, we have metalized, which has metal flakes embedded in the polyester foundation. In addition to bringing a shiny appearance to the glass, the reflective coatings also aid to deflect UV radiation. Sun damage, such as fading or cracking, can occur as a result of the latter.


Instead of metallic flakes, carbon is used in the next stage. On hot days, this type of film will assist keep the interior of your vehicle at a comfortable temperature. This is because it prevents roughly 40% of the infrared photons from entering.


Ceramic window tint is the final option. Any auto specialist will tell you that this is the best option for the majority of automobile owners. Ceramic particles are used in place of metallic flakes or carbon. These not only deflect half of the incoming solar heat, but also block 99 percent of all UV radiation. Because of the higher price, ceramic window tint lasts longer than other solutions, at least ten years or more. It is now time to take a closer look at some of the most common telltale indicators that it is time to remove your car’s window tint.

Signs That It Is Time to Remove Your Current Window Tint

As previously said, there are numerous advantages to having window tint installed on your vehicle. UV rays are blocked, and the compartment is kept at a reasonable temperature. As well as reducing the strain on your eyes from the glare of the sun. Even while window tints are designed to last a long time, as they age, they become less effective. Watch out for these warning signs:

Signs You Need New Window Tint for Your Car - The Pelahatchie News

Peeling or Bubbling

First, you’ll notice peeling around the edges or bubbles on the surface of your window tint as it wears. Over time, the peeling around the borders of your windows will expand. Bubbles, on the other hand, are unsightly and can even cause tears when your window is being rolled up or down.

Reduced Protection from the Sun

If you discover that your windows aren’t shielding you from the sun, you may have an old window film. In addition, UV radiation can harm your car’s interior if it’s not properly tinted, resulting in higher cabin temperatures. Plastic, vinyl, and leather might become cracked as a result of this drying process.


As with peeling or bubbling, if your tint fades and loses its color, it will distract from the overall appearance of the vehicle. This symptom often occurs in conjunction with the previous one, which was a decreased level of protection from UV radiation. It’s a strange coincidence, but purple is the most common hue of window tint. The deterioration of the dyes employed in the production process is assumed to be the cause of this.

Darker Than the Local Law Allows

Only films that diminish incoming light by 50% are typically permitted on the back and rear windows. For the driver and passenger windows, this rises to 35%. Most states allow only the top brow (about 5-inches) of the windshield to be tinted (often 35% or less) for the front windshield. A fine of several hundred dollars is likely to be issued if you break these rules. Now that you’ve learned how to tell if your tint has reached its limit, you’ll be able to get the best results. If you’d like to get rid of it, here are several simple DIY methods.

Method #1 – Hairdryer/Heat Gun

Heat Gun Vs Hair Dryer - How To Properly Use Heat Gun On Leather -  LeatherSeats.com - YouTube

You’ll require the following items:

Heat gun or hairdryer

a Glass Cleaning Product

Slashing Razors

Towels for the shop are available.

Step #1

Using a hairdryer or heat gun, hold it about 6-inches away from the surface (any closer and you risk melting the film). Let heat dissolve the adhesive layer as you move back and forth.

Step #2

Peel back roughly an inch of the film with a razor blade. Then, as the heating element moves back and forth, continue to gently pull on the tint. Keep a close eye on it; it should leave a clean surface in its wake. It’s possible that you’re not heating it for long enough if a residue forms. Repeat this procedure until the entire sheet of film has been removed.

Step #3

Spray the glass with glass cleaner and drape a shop towel on the edge of the window to minimize cleanup. Clean up with a damp cloth after 15 seconds of letting it settle.

Method #2 – Steam Cleaner

You’ll require the following items:

Steam Cleaner on the Go

a Glass Cleaning Product

Slashing Razors

Towels for the shop are available.

Step #1

Begin by covering the window with a shop towel, which will save you time in the long run. Spray the entire window in back and forth motions with the steam cleaner. Then, in a manner similar to the previous technique, start at a corner or edge and peel back a little amount of the film with the razor blade.

Step #2

Hold the steam cleaner at a distance of six inches from the film and gently tug on it as you travel back and forth. There should be no sticky residue left behind.

Step #3

For best results, spray the entire window with glass cleaner and let it sit for 15 to 20 seconds. After that, simply wipe it down with a store towel. Using a razor blade and holding it at an angle to avoid damaging the surface, remove any remaining adhesive.

Method #3 – Sun Power

If you reside in a place that gets a lot of sunlight, this method works well. Prior approaches should be considered as well if these are not present. You’ll require the following items:

Plastic Bag in Black

a Glass Cleaning Product

Slashing Razors

Towels for the shop are available.

Step #1

The first step is to apply a generous amount of glass cleaner to the whole surface of the glass (tint side).Put a plastic bag over the window and press it firmly into place.

Step #2

Wait for around 30 minutes before reopening the door. The glue will be warmed by the sun, making it easy to remove the tint with a little tug. Make sure to inspect the area thoroughly to check if there is any adhesive residue. In the event that there is a residue, you’ll either have to use our prior procedures or spend a lot of time scraping.

Step #3

A shop towel and some glass cleaner are all that’s needed to complete the cleaning process.

A Note About Rear Defrosters/Heating Elements

Things You Should Know About Your Car's Rear Window Heating – NOVUS Glass

Rear defrosters and heating elements refer to the lines and small dots that run across your back window. If you’re not careful while using a razor blade while removing tint, you could possibly injure them. Glass cleaner should be sprayed, let it set for 15 seconds, and then wiped clean. Keep the blade at an extreme angle and as close to the class as possible if you must use it. Avoid going up or down the defroster lines by moving sideways instead. Its ability to work correctly can be ruined by a single mistake.

Don’t Waste Money – Do it Yourself

It’s that easy, isn’t it?

Remove your car’s window tint yourself rather than paying a professional to do it for you. With just a shop towel, a razor blade, a hair dryer, and some glass cleaner, you’ll be ready to tackle the job at home in no time at all.