Once in a while, your Ford may not accelerate as quickly as it used to, and if that happens, the throttle position sensor may need to be reset.
Having a malfunctioning Ford throttle position sensor can create a wide range of issues with your vehicle.
You Are Watching: How To Reset Throttle Position Sensor Ford Updated 09/2023
Resetting your Ford’s throttle is a straightforward procedure that can be completed in just a few minutes, but you should wait until the problem gets worse before taking action. To get your Ford back on the road, we’ll walk you through the process of resetting the throttle position sensor.
Remove the engine control module fuse or unplug the negative connection for up to five minutes to reset your throttle position sensor.
How The Ford Throttle Works
Knowing how the throttle works is essential to resetting the throttle position sensor on your Ford. The throttle is responsible for allowing air into the engine, which ignites and generates power.
In order to regulate how much air is sucked into the engine, a throttle cable opens and closes the throttle plate.
The throttle position sensor tells the computer how far the throttle plate has been pushed open by the user. When the computer gets this data, it makes adjustments to the amount of fuel injected into the engine. If your car’s throttle position sensor is malfunctioning, it might create a wide range of issues.
There are a wide range of symptoms, from a minor loss of power to a total engine shutdown. The check engine light may also turn on in some instances.
Tools You May Need When Resetting The Throttle Position Sensor
A few things are required before beginning the process of resetting the throttle position sensor in your Ford. Use of a battery cable and an engine control module fuse is required when using the battery cable method of removing the engine control module.
The key approach just necessitates the use of a screwdriver. To identify the fuse box and the throttle position sensor, you will need your Ford manual.
How To Reset The Throttle Position Sensor
The throttle position sensor can be reset in a matter of minutes using a simple procedure.
1. Find The Throttle Position Sensor
The throttle position sensor is the first thing you need to find. On the side of the throttle body is the most common location. Look in your car’s service manual if you can’t find it.
2. Disconnect The Electrical Connector
Read More : Tesla Roadster 2.0 Revealed Elon Musk Updated 09/2023
Unscrew the electrical connector from the throttle position sensor after finding it. This may necessitate the use of a pair of pliers.
If your car has an electronic throttle control, you’ll see two wires. For the throttle position sensor and the throttle actuator control. Only the throttle position sensor connector needs to be removed.
To access the connector on some vehicles, you may need to remove a cover. After disconnecting the connector, you can move on to step three.
3. Unhook The Negative Cable From The Battery
The negative battery cable can be unhooked from a standard throttle cable. The throttle position sensor will be reset as a result.
In vehicles with electronic throttle control, the engine control module fuse must be removed. The throttle position sensor will be reset as a result.
4. Remove the Screws
To remove the throttle position sensor, first remove the battery and then look for the two screws that secure it in place. To remove the throttle position sensor, unscrew these screws and carefully remove it from the engine.
Once it’s out, use carburetor cleaning or degreaser to clean it. Make sure to thoroughly clean the sensor so that it can function properly.
5. Reconnect The Battery and Start The Engine
Reconnecting the battery and starting the engine will be necessary after you’ve cleaned the throttle position sensor. Typically, the check engine light will flash for a few seconds, then go out. Your automobile will need to be taken to the shop for an inspection if this does not work.
Useful Tips To Prevent Throttle Position Sensor Problems
Many things can be done to avoid faulty throttle position sensors from occuring.
1. Regularly clean the throttle body and sensor.
This will prevent the sensor from becoming clogged with dirt and filth.
2. Check the throttle position sensor for damage.
The sensor must be replaced if it has any cracks or damage.
3. Make sure the throttle cable is adjusted properly.
An inaccurate sensor reading can be caused by a faulty throttle cable.
4. Keep an eye on the check engine light.
The check engine light indicates that the throttle position sensor may be malfunctioning.
Do You Have to Reset The Computer When Resetting The Throttle Position Sensor?
Resetting the computer is necessary after disconnecting the battery. The negative battery terminal can be disconnected for a few minutes and then reconnected.
Read More : How Long Can Oil Sit In An Engine Updated 09/2023
However, it is not always essential to reset the throttle position sensor. You shouldn’t have to reset it if you cleaned and checked it for damage beforehand.
But if the sensor continues to give you problems, you should take your automobile to a professional for a more thorough analysis.
How Do You Calibrate A Throttle Position Sensor?
You’ll need an electronic throttle control actuator if you want to calibrate the throttle position sensor. Using this instrument, the throttle body can be opened and closed manually to ensure that the sensor is properly calibrated.
There is a good chance you will require a mechanic if you don’t have this tool on hand. When they calibrate the throttle position sensor for you, they’ll use the actuator.
What Happens When You Disconnect The Throttle Position Sensor?
Stalling occurs when the throttle position sensor is removed. As a result, the sensor is the one that notifies the engine control module how much fuel to utilize.
The engine will not be able to operate correctly if the sensor does not send a signal. As a result, unless instructed otherwise by a mechanic, never remove the battery or sensor.
Where is the Throttle Position Sensor Located In My Ford F150?
Near the throttle body on the engine’s side is the throttle position sensor for a Ford F 150. A black box with two cables flowing out of it is all that is visible.
Remove the air intake ducting in front of it to gain access to it. When this is done, you will be able to see and access the sensor with ease.
Do You Have To Recalibrate The Throttle Body?
The throttle body doesn’t need to be re-calibrated too often. The throttle position sensor may need to be replaced if you’re encountering issues with it.
Why Is My Ford F-150 Sputtering?
If your Ford F 150 is sputtering, the throttle position sensor may be to blame. For the engine control module to know how much gasoline to inject, this sensor sends signals to the module.
The engine can splutter if the sensor is malfunctioning or has a fault. When your automobile sputters, you’ll need to take it to a repair for additional investigation.
Conclusion
One of the most critical components in your automobile is the throttle position sensor. It instructs the engine control module how much fuel to inject by sending signals.
The engine can splutter if the sensor is malfunctioning or has a fault. If you’re encountering issues with your Ford F 150, you’ll need to take it to a repair for additional investigation.
The throttle body doesn’t need to be re-calibrated too often. The throttle position sensor may need to be replaced if you’re encountering issues with it. Close to the throttle body, you’ll find the throttle position sensor. A black box with two cables flowing out of it is all that is visible.
We sincerely hope you found this information to be beneficial. Contact us at any time if you have any concerns or inquiries.
Sources: https://micdot.com
Category: Car
