Updated at: 17-04-2022 - By: micdot

A system called the Supplemental Restraint System (SRS) is in charge of your car’s airbags. It was made to help your car’s seatbelts keep you safe by giving you extra support.

This means that when the airbag light of your car shows up on your instrument cluster in your dashboard, it means there’s a problem with the airbag system. This is why.

If there are broken wires, faulty airbags, bad connections, or even a bad control unit, this could be the curse of this car!

You need to check and change the SRS system even if you haven’t had an accident.

A lot of experts say that you should check your airbags every 10 years. This has sensors and wiring systems all over your car, and they will break down over time.

It doesn’t mean you should buy a new system, but it’s important to check them and make sure everything is working properly. See this guide on how to reset the VW airbag light without a tool and this post on what causes the light to come on. You don’t need a tool to do this. In the Mazda 6, there is a light that blinks when there is an airbag.

So Is It Illegal To Drive With Airbag Light On

Does it matter if you have the airbag light on? No, it doesn’t matter if you have the airbag light on because it means there’s a problem with your airbag system. You might not be able to use the airbag if you have an accident, and this could be dangerous or even kill you!

Because of a problem, the airbags will not go off when there is an accident. So I suggest that you fix the problem right away. As soon as the airbag system isn’t working well, this could lead to death or very bad injuries. read this, as well Is it possible to sell a car that has had its airbags open?

How To Bypass Airbag With Resistor

By ignoring the airbag light that is on by itself, you can save time by not having to take your car to the shop. To get around it, follow these steps:

Take the first step.

Use your key to turn on your car’s ignition switch, and then drive away. On, off, start, and other things are all on the switch next to the steering wheel. It has four positions: on, off, start, and other things.

There are two “off” settings on some cars, but the first one lets you take your key out of your car’s ignition system. The second lets you turn off your car.

Another step.

To turn off the airbag system’s warning light, you must do this. It might take about seven seconds, but it could be longer. You can now turn off the ignition for a second after the airbag light has gone out.

It’s Step 3.

Now, you should turn the ignition switch back off for more than three seconds, then turn it back on again.

It’s Step 4.

This is the last step. Repeat steps 1 to 3 two more times, which means that you’ve done it three times now.

Please check out my YouTube videos as well if you haven’t already: Please join me on YouTube by subscribing here, so you can see my new videos that I post there.

This is the time to turn the ignition switch back on so that the airbag light can be completely turned off.

Every time you start your car, the airbag light system should be on for about seven seconds before it goes off for good.

What Can Cause The Airbag Light To Come On?

You should keep in mind that there could be a lot of reasons why your airbag lights will be on. Here are a few of the most common:

#1. Your Airbag System Needs Resetting

Your airbag light will be on if you were in an accident and the airbags didn’t work, so you’ll know. It means that the airbag needs to be reset at your local car repair shop.

#2. Corroded Sensors

It could be that the sensors have been corroded if the car hasn’t been in a lot of water damage.

Make sure that this isn’t the case, and your airbag light will go on.

#3. A Depleted Battery

When your car’s battery dies, the backup battery system for your airbags can run out, causing the system to say that something went wrong.

#4. Dislodged Wiring

Side airbags mean that sometimes, the side airbags can make a mistake by coming up on the passenger side.

Make sure that the wires on that airbag can get messed up or even fall off when the passenger’s seat moves forward and backwards.

There are times when you see that one of the plugs isn’t connected, and we don’t want you to try to plug it back in, because this could make the airbags go off. A local garage can check up on your car and make sure it’s in good shape.

#5. Faulty Seat Belt

If your seat belt sensor isn’t working, this could be the reason. This is important to know: Your car seat-belt sensor may not work all the time.

So, when this happens, the airbag light can come on at the same time.

#6. The Airbag Clock Spring Needs To Be Replaced

It’s important to keep in mind that the spring coils on your steering wheel are there to keep up with maintenance between your airbag and the wiring.

Use it: The spring can break or wear down, which means the airbag light will be on.

Will Disconnecting Battery Reset Airbag Light?

It is true. Then, there’s a need to wait at least five seconds before moving on. After that, it will be time to connect the negative terminal again.

It’s also important to make sure that you turn on the battery in your car to reset the sensor. But if the airbag sensor warning light goes out, then it means that it has been set back up.

How To Reset Airbag Light With Scanner

The airbag light on your car can be reset with a scanner. This will save you from having to go to the mechanic.

You can only see your airbag light on your dashboard if your car has been in an accident and the airbag didn’t work. You can use a scanner to reset the airbag. Do these things:

Take the first step.

When you put your key in, turn the switch to a on position.

Another step.

There’s still one more thing to do. Watch for the airbag light to turn on. This light will stay on for about seven seconds, and then it will turn itself off.

Once it has shut off, you should turn off the switch right away and wait three seconds.

It’s Step 3.

When you finish, do steps 1 and 2 two more times.

Engine start-up: You can start your car. So now, the SRS light should be on for about seven seconds, and then it should go out and stay off. As soon as this happens, the airbag light is turned off again.

Conclusion

It isn’t very safe to drive with your airbag light on. Keep in mind that if the light is on, then there’s a problem with your airbags. Because something is interfering with your car seat belt switch, your airbag lights may go on.

Even so, one of the best ways to reset the airbag light is to use an OBD2 scan tool.