There are gaskets, an oil filter, and an oil filter cap in the jeep’s oil filter house. All of these things are important to keep the engine oil in your Jeep Wrangler clean and stop it from leaking.

A Jeep Wrangler oil filter housing recall only happens when there’s a safety issue so that your car doesn’t stop running.

You Are Watching: Jeep Wrangler Oil Filter Housing Recall Updated 04/2024

This can be done by the Jeep company or the National Highway Traffic Safety Administration. It costs the manufacturers and you don’t have to pay for it. Jeep Wrangler oil capacity and wrangler load capacity are things you might want to learn about if you want to know more.

2013 Jeep Wrangler Oil Filter

Engine oil usually has particles and other things in it. This happens when the oil goes through the oil filter. The filter picks up these contaminants so that only clean oil can go into the engine.

This is why your 2013 Jeep Wrangler needs only the best and best oil filter out there. It is a tool that helps keep things in good shape.

When the oil filter on a 2013 Jeep Wrangler gets old, it can cause overheating, low oil pressure, and even dirty exhaust. This can happen when the filter is old.

If you want to keep the oil in your 2013 Jeep Wrangler clean, you need to change the oil filter from time to time. There are different types of oil filters as there are different types of oil and different types of cars.

Keep your 2013 Jeep Wrangler in good shape by following the maintenance guide in your owner’s manual. You can find the best oil filter for your car there.

When you buy one, think about what kind of material was used to make the filter, how long it can last, and how big it is. Good oil filters can cost anywhere from $9 to $21 for a pack of 10.

2013 Jeep Wrangler Oil Filter Location

The oil filter for the 2013 Jeep Wrangler is on top of the engine, just behind the alternator. This is where you can find it.

To find it, you have to remove the engine cover, which doesn’t need any tools to do. Lift the front edge and pull the whole cover forward.

The location of the oil filter housing on Jeep Wranglers is usually on the side or on top of the engine so that it is easy to change the oil or the filter.

The oil filter is a cartridge filter that is put in a chamber and then attached to the engine. It is then able to get the oil.

Read More : Car Axle Replacement Cost Updated 04/2024

People used to make these kinds of filters in the past. They didn’t use this kind of filter. They used the old-fashioned spin-on can filter instead.

2013 Jeep Wrangler Oil Filter Housing Recall

When there is a problem with the oil filter housing, the 2013 Jeep Wrangler’s oil filter housing is a part that needs to be fixed.

There are other things you should keep in mind, though, like having a high-quality oil filter in your housing. This way, you can keep your parts and even your engine from getting worn down by contaminants that get through the oil filter when your oil is changed.

2013 Jeep Wrangler Oil Filter Cap Size

This is the size of the oil filter cap for a 2013 Jeep Wrangler: 24mm, or 1/8 inch. So a 24mm socket is used to remove the oil filter because its head is bigger than other socket head sizes.

If you want to change your own oil filter or oil in your 2013 Jeep Wrangler, you can buy a wrench with a 24mm angle. This will make it easier for you.

It’s possible that you’ll like my YouTube videos, too. Please join me on YouTube by subscribing here, so you can see my new videos when I post them.

3.6 Pentastar Oil Filter Housing Recall

The 3.6 Pentastar oil filter housing recall is very important to having a smooth engine.

This is why it’s so important to change your oil filter when it’s time and only use a high-quality oil filter when you do.

As you change your oil, the oil filter makes sure that the oil is clear. This helps to lubricate the engine, keep it safe, and also keep it from wearing down.

2012 Jeep Wrangler Oil Filter Housing Recall

It can be dangerous for people to drive their Jeep Wranglers if there is a mistake in it. The Jeep’s manufacturers make a recall.

An oil filter housing recall means that the problem with the oil filter housing is the source of the problem. It is fixed during the recall, and the cars are brought back.

As a Jeep Wrangler owner, you should also take your safety seriously and make sure your oil filter and the area where it is housed are cleaned and checked on a regular basis.

2014 Jeep Wrangler Oil Filter Housing Recall

When there is an oil filter housing recall for Jeep Wranglers, you don’t have to pay for the repair. That doesn’t mean that there are many recalls.

However, the 2014 Jeep Wrangler is known for having problems with its oil filter.

Read More : How Long Before Car Battery Dies With Radio On Updated 04/2024

To avoid this, change your oil filter often and always use good engine oil during an oil change.

Jeep Wrangler Oil Filter Housing Replacement Cost

People who work on Jeep Wranglers charge different prices for parts and labor when they need to change their oil filters. A lot of the price is based on where you get it changed.

In order to have it replaced at a dealership, you’d have to pay more to have it done at an auto repair shop or by a mechanic. Between $170 and $660, it cost to change the oil filter housing.

If the gasket on the oil filter housing starts to leak, you’ll need to change it. The oil filter housing doesn’t usually need to be changed.

It costs between $100 and $250 to replace the oil filter housing gasket, with the gaskets costing at least $45 and more to buy them.

Your oil needs to be changed as soon as you notice that it’s leaked or that the oil filter housing has a big crack.

2015 Jeep Wrangler Oil Filter Housing Recall

A 2015 Jeep Wrangler oil filter housing recall can happen if the housing has been worn and torn, which can cause it to leak.

This recall is important to make sure that you don’t have problems with your oil filter, like low oil pressure, overheating, or a torn engine.

Oil filter housing that isn’t good, or low-quality oil and oil filters that aren’t good when they’re changed out.

2014 Jeep Wrangler Oil Filter Housing Upgrade

To make sure your Jeep runs smoothly, you should get a new oil filter housing for your 2014 Jeep Wrangler. Upgrades should be done as often as possible.

It’s also important to change the housing of your oil filter as soon as you see a crack in it.

Keep an eye on your oil filter housing when it’s time for a new one. Use only high-quality housing when you do this.

2017 Jeep Wrangler Oil Filter Housing Recall

The 2017 Jeep Wrangler can only be recalled if the people who make Jeep notice that there is a mistake in the Jeep. This mistake, however, could put the lives of the people who own the cars at risk.

To make sure you’re safe, don’t wait until there’s a recall to do regular maintenance on your oil filter housing and its parts. Always think about your own safety.

Sources: https://micdot.com
Category: Car