Make sure you know the screws that will fit your license plate precisely before you begin installing it. Most vehicles can use the most common license plate screw size, however there are a few exceptions.
Before attempting to fix your plate, make a list of all the screws that go into it. Read on to learn about the most frequent screws and the ones that would help you fix your vehicle’s specific model number.
The Most Popular License Plate Screws for Car Models in the US
Most cars in the United States use the 14 34 inch self-tapping license screw, which can be found in nylon or plastic retainer versions. Because these screws are constructed of stainless steel, they may not fit autos with metallic thread holes. Furthermore, the type and size of plate screws for automobiles would be determined by the make and model of the vehicle.
The Importance of the Right Screws for the License Plate
Your license plates may slip off over time, and the screws you use to fix them are critical. Placing the plates correctly with the proper screws ensures a secure fit. If you use a smaller screw, you risk having the plate slip off once more.. In addition, larger screws may not fit the holes in the license plate precisely, causing damage.
Common Plate Screws for Honda
The steel plate screws used in Honda lorries and cars are well-known. The screws that attach the Honda license plates have a diameter of 14 to 34 inch. They could be used on all Honda motorcycles, vehicles, and trucks with these screws.
Screws made of stainless steel with a black finish, which is guaranteed to never rust, are universally compatible with the plates and are long-lasting. Since they’re so simple to install and don’t corrode, nylon inserts aren’t necessary for these screws.
Common Plate Screws for Toyota
About 1*0. 5*0. 5 diameter screws are needed for the Toyota license plates. The best screws for Toyota vehicles are the RSD Never Rust OE type screws. Because they’re made of stainless steel, this set of screws will work with any Toyota plate. The majority of Toyota’s front bumpers require larger screws and a plastic anchor for fastening convenience. If you want to use RDS screws, you’ll need two self-tapping license plate fasteners for the rear plates.
Common Plate Screws for Chevrolet
If you have a car that requires a longer or shorter license plate screw, you may want to consider utilizing a 12- or 8-millimeter screw. However, stainless steel, which is ideal for Chevrolet automobiles, is the greatest option. Choose plates that do not require truss heads since they are self-tapping and rust-free and hence suit the license plates properly.
Common Plate Screws for Nissan
The standard size regular license plate screw is what you’ll need to use to secure your Nissan’s license plates. Standard screws made of stainless steel plated with Zinc can be used to efficiently prevent rust. Screws made of stainless steel will last longer, so look for ones with a black finish. Slotted hex heads on the Nissan vehicle screws make it easy to attach license plates.
Common Plate Screws for Ford
The screw size of 14 14 5/8 inches is perfect for the Ford car, truck, and motorbike license plates. Ford F 150 models, as well as most other vehicles with plastic and nylon holders, would benefit from these screws. Slotted screw heads are used on these screws. A 3/8″ drive socket or flat-head screwdriver will take care of the problem.
How to Fix License Plate Screws
If you’re not used to working on cars, fixing license plate screws might be a hassle. Fortunately, there’s a simple solution for that problem. There are a few things you’ll need before you can begin: a deep-penetrating oil, a spray bottle, vinegar, screws, screwdrivers and license plate screws. Start by removing the old, rusted or broken screws and replacing them with new ones, like you did before.
As penetrating oil loosens the corroded bolts, lubricating the screws is the first step. Spray the screws with oil and allow them to sit for 30 minutes before attempting to loosen the old ones.
Let’s pretend the oil doesn’t soften the corroded bolts any more. It’s possible that you’ll need to use vinegar to get the screws unscrewed. Using a wire brush and vinegar to remove rust from the surface and the screws is a good second step.
As a result, an impact wrench fitted with a suitable bit and capable of producing high torque is recommended for removing any remaining rust. When all other options have failed, this procedure may cause damage to rusty fasteners. It’s now time to replace the old rusty screws.
When installing the new license plate screws, use stainless steel if possible because it will last longer and be easier to repair in the future. You’d use a flathead screwdriver and screw the bracket into the bumper in a clockwise orientation.
After mounting the brackets, you can use the screws to attach the license plates and then line up the holes in the plate’s corners with the holes in the bracket’s corners. Once the plate is assembled, you’d insert a screw clockwise into the opening and tighten.
Final Thoughts
It is important to know how to fix license plate screws correctly because they can rust and fall out of place. It is unfortunate that you cannot use all of the screws that come with your license plate. As a rule of thumb, the most frequent license plate size is 1 14 3 14 inches. Screws that are too small may damage the plate holes, while screws that are too large may damage the plates themselves. I wish you luck in your quest to locate screws that will properly fit your license plate.
