Updated at: 22-03-2022 - By: Lucas

Affiliate links can be found throughout this piece. Using any of the links on this page will allow me to earn a small commission at no additional cost to you.

There are a number of warning indications that a sensor is malfunctioning, and ignoring them could result in catastrophic harm to the vehicle. If an oil pressure sensor fails, what are the signs?

The oil pressure warning light will come on and off intermittently if the oil pressure sensor is defective or deteriorating. This might lead to more expensive damages over time.

Oil pressure sensors are often overlooked by drivers, and some may even remove them for a variety of reasons. However, the fact remains that oil pressure sensors play a critical role in letting you know when you need to refuel or check your engine’s oil level.

You should be aware of these signs and take immediate action if you notice any of them.

Symptoms Of a Bad Oil Pressure Sensor

Oil Pressure Sensor Symptom-1

The oil pressure sensor is the same as the oil pressure switch, and the two terms are used interchangeably in this article.

Let’s get to the meat of the matter now.

1. Intermittent Oil Pressure Warning Light

This is a clear indication that the oil pressure sensor in your vehicle is malfunctioning. Your dashboard will light up if your oil pressure sensor detects that your pump isn’t putting enough oil into the engine, which is why this sensor or switch is necessary.

The oil pressure light on your dashboard is a warning that you need to do an oil change or top off the oil reservoir if the sensor is functioning properly. If the indicator light keeps blinking, it’s a sign that the oil pressure switch is malfunctioning.

The computer activates and deactivates the warning light based on the signals it gets from the switch, which causes the light to flicker intermittently.

If you let it continue on for a long period, it could cause your car to stop starting, which is more likely to happen to newer models.

A defective oil pressure switch can sporadically activate and deactivate the check engine light in older vehicles that don’t have a specific oil pressure warning light/icon on their dashboard.

2. The Warning Light Never Goes Off

Too many caution lights on your dashboard are clearly annoying, but they don’t just turn on by themselves. Your car’s central computer must have received a bad signal that triggered the illumination of all those warning lamps.

In addition to the oil pressure light flashing intermittently, another indicator of a malfunctioning oil pressure sensor is if the warning light illuminates and does not go out even after adding oil.

After you’ve topped off your engine’s oil, the warning light is meant to disappear — only to reappear when you’re running low. The oil pressure sensor should be the first place to look if the check engine light continues to illuminate even after an oil change.

Replacement of the sensor is critical so that you know exactly when your vehicle is running low on oil.

In the worst case scenario, you may need a new engine because the damage to your current engine may be irreparable.

3. Oil Leak From The Sensor Area

Oil Leak From The Sensor Area

Regardless of where the leaks are coming from, they are not normal. Changing a sensor if you observe oil leaks from the sensor location is another clue that you need to do so. Some people, however, may not know where the oil pressure sensor or switch is located.

Detecting oil pressure is made possible by a sensor located in the engine’s oil system. Oil can seep from the sensor’s central hole or through the sensor’s multiple treads if the sensor is defective.

Oil sensors in Vauxhalls allegedly leak through the center of the sensor’s body when they fail. The block connector is leaking and spraying various parts of the engine compartment. You’d see oil leaking from several places in this situation.

For your own safety, if possible, remove the oil pressure sensor block and try to figure out where the leak is coming from. If, on the other hand, you lack the requisite technical expertise, consider hiring a mechanic to assist you.

4. Constant Noisy Timing Chain Yet No Warning Light

There is nothing worse than driving around in a car that produces an unwelcome noise, and especially if the noise is originating from the engine compartment.

A large number of moving parts and chains in the engine compartment need to be lubricated on a regular basis to ensure their proper operation.

Friction builds up, and you’ll start hearing loud cranking or ticking noises while driving if these components don’t get enough oil.

It’s possible that you’ve got a defective sensor if you start hearing strange noises and your oil pressure warning light isn’t on yet.

The warning light won’t turn on if your engine is already running low on oil since a defective or damaged sensor won’t be able to tell the central computer. When the sounds are consistent, you need to move swiftly to avoid being caught off guard.

The first step is to check the oil level in your engine using a dipstick; pay great attention to see if the oil is unclean. Do not wait until your engine’s dipstick indicates that it’s low on oil to change the oil; instead, do so right away.

A malfunctioning oil pressure sensor would have caused the warning light to turn on, therefore it’s safe to assume that you had one. It’s a good idea to change the oil pressure switch/sensor when you get your oil changed (or refilled).

In addition to the timing chain, your engine’s other metallic parts can generate noise if they are not properly lubricated.

5. Incoherent Oil Gauge Reading

If your automobile has an oil pressure indicator, that’s another area to look for signs that you’re short on oil. It’s dangerous to drive if the oil gauge reaches “0,” which indicates that there is no oil in your engine.

Because of this, it’s a problem if the gauge is always at the “0” position (or a fixed position) even after an oil change (when you’re running low on oil). Assume you have a faulty sensor in this instance.

Electronic signals are used to read the oil pressure gauge, which is designed to receive its reading from the sensor. Thus, a malfunctioning oil gauge sensor would be equivalent to inconsistent readings.

Oil Pressure Sensor Replacement Cost

To replace an oil pressure sensor, how much does it cost?

The price of an oil pressure sensor replacement might range from $50 to $250, depending on the labor expenses and the model of your vehicle.

Between $30 and $100 is the usual cost of an oil pressure sensor, while the labor ranges from $20 to $150. You should expect to pay anywhere from $5 to $100 to replace your car’s oil pressure sensor, depending on the part’s product number.

If you’re in a hurry, you may expect to spend between 30 minutes and an hour installing a sensor, depending on the area.

What More?

A malfunctioning oil pressure sensor might potentially cause overheating. This is due to the fact that insufficient oil is a common cause of engine overheating.

Overheating can occur if the engine’s parts aren’t getting enough oil, which might cause friction. If you see any of these signs, don’t wait to fix the problem.