During this post, we’re going to talk about how to fix the electronic throttle control and how to reset the electronic throttle control on your own. The Electronic Throttle Control (ETC) is an important part of your car, and you need it. It is a piece of technology that connects different parts of your car to make sure it runs well. Other parts of the car also need to be serviced and kept up. The electronic throttle control is no different from them.

You can reset and fix a bad service electronic throttle control on the ram 5500, 3500, and 2500. We’ll see how to do that in this blog post. Then, read this, too. To set the steps for Electronic Throttle Control for Chrysler 300,200, and Ram 1500 again, click the button below. When the service electronic throttle control doesn’t work right, this article will show you how to fix it, what a service electronic throttle control is, and how to set it back up again.

First, let me explain what “service electronic throttle control” means. Then I’ll show you how to service the electronic throttle control.

There are two parts to servicing the electronic throttle control: having the electric throttle body cleaned and getting rid of any dirt that has found its way into the electric throttle body. In order to avoid having problems with the throttle control, this needs to be done. Every time you take your car in for regular maintenance and service, you can have your mechanic take a look at it. For an electronic throttle control, I think it’s best to let a certified mechanic clean it. In this case, let’s look at how to fix the electronic throttle control.

What Does Service Electronic Throttle Control Mean?

For you to be reading this, you must have heard of the electronic throttle control, which is what this is about. Isn’t it weird that your car moves when you put your foot down? You start your car every day by putting your key in the ignition, turning it on, shifting gears, and then putting your foot down. It is because of the Electronic Throttle Control that it is possible.

The Electronic Throttle Control is a type of technology that connects the gas pedal to the throttle by making it electronic. In this case, there is no wire connecting the throttle to the pedal, but when that pedal is pushed the throttle can figure out what that means. There are three parts to the Electronic Throttle Control: the accelerator pedal, the throttle valve, and an engine control module (ECM).

These three parts or components each play a unique role in the performance of the car. The electric throttle body is a motor that moves the throttle valve with electricity. The accelerator pedal has two or more sensors that tell the car how fast it is going. In this case, this electric throttle body is the engine control module (ECM). It is also called the powertrain control module (PCM). It is software that makes use of the data from the sensors. Love this post? You might also like this one: How to calibrate your car’s Throttle Position sensor.

Service Electronic Throttle Control

A light on the electronic throttle control is a sign that there is a problem with the car. The sensor is telling you that you need to get a new sensor or change the settings on your phone. To fully understand what to do, follow the steps below.

Step 1: Diagnose the Vehicle

Keep an eye on your car to see if there are any trouble codes. Then, have them fixed. It’s also a good idea to check your Powertrain Control Module for problems. To check the engine, look for air leaks. The filter cap seals, PCV system, and dipstick should also be checked for flaws when you service your car.

In this case, go ahead and start over. Codes about wrong idle speed, air circulation sensor pressure in exhaust or a lit engine light don’t mean you should reset your Electronic Throttle Control, but if they do, do not do that.

Step 2: Regulate the Temperature

Adjust the temperature of your car so that it’s at the right temperature for it to work. Check to see if the ignition timing is in line with the manufacturer’s recommendations. You should turn off the air conditioner, radio, rear window defroster, and heater so that the engine doesn’t get too hot and the throttle plate doesn’t move out of place. As a last step, put the front wheels in neutral and make sure they are facing straight ahead.

Step 3: Fully Release the Gas Pedal

First, let go of any pressure on the gas pedal. Then, reset the throttle control. When you do this, turn on the ignition for not more than 2 seconds, then turn it off for about 10 seconds. Make sure you don’t start the engine. Turn on the ignition again for 2 more seconds, then turn it off again and wait 10 more seconds before you start it again. This tells the computer in your car that the gas pedal is either open or closed.

Step 4: Turn on and  off the Ignition

Turn on the ignition for about 4 seconds, then turn it off again. When you turn it off, press the gas pedal a few times and let go of it after five seconds, then do it again. Lie back and relax for about 8 seconds. Then, press down on the gas pedal for about 20 seconds. This should keep the engine check light from going off and on all the time. After the light is steady for a few seconds, take your foot off the gas pedal right after.

Step 5: Allow Engine to Idle

Start your car’s engine and let it run for a while. Within 20 seconds, the engine is revved up a lot of times. This is to make sure that the idle speed is in line with the manufacturer’s suggestions.

If all this doesn’t work out, you’ll have to start over again. When you’re done, try again. There will be no more steps if you are successful.

How to Fix Service Electronic Throttle Control and how to reset electronic throttle control manually

If you keep your Electronic Throttle Control well-maintained, it can last for a very long time, even through the life of your car. Lights go off when there’s a problem on the way. A problem with the electronic throttle control might not be so bad that you need to buy a new one. The throttle body might need to be cleaned and set back up. There is a good chance that the throttle control is broken, so you will need to buy a new one.

6.7 cummins service electronic throttle control reset

It doesn’t matter how you want to reset the throttle control. There are two ways you can do it.

Resetting the service electronic throttle control ram 5500, the service electronic throttle control ram 3500, and the service electronic throttle control ram 2500 will work.

service electronic throttle control reset

Use an Alfa or WITech to run the codes and set them back to how they were.

Reset it yourself by taking all the pressure out of the gas pedal first. There are two ways to start the car: This should fix it.

How To Replace A Bad Electronic Throttle On Your Car

In order to fix the electronic throttle control other than resetting it, you need to buy a new service electronic throttle control for the ram 5500, the ram 3500, or the ram 2500.

So, if you need to change the throttle control, follow the steps below and also watch the video above for more practical images and ideas.

It’s possible that you’ll like my YouTube videos, too. Please join me on YouTube by subscribing here, so you can see my new videos when I post them.

The first thing to do is to get rid of the air dust. Then, loosen the throttle clamp and remove it.

When you unplug the electrical connection, use a screwdriver to pry it open and then get it out with it.

Let go of the four screws that hold the throttle. Then, take the throttle out of your car.

When you remove the old throttle, put the new one in its place and screw it in.

Make sure to plug in the electrical connection and secure it to the wall.

Replace the air duct and make sure the throttle clamp is tight.

Reset the throttle control one of the two ways above.

I hope this article on how to service electronic throttle control was useful. Please let me know. If it helped you, don’t be afraid to share it and also bookmark this page for future use.