Toyota Corollas have a handy feature that tells you when they need to be serviced. Your dashboard has a small light that turns on every so often. This light lets you know that it’s time to take the car in for service.
After you service it, it will usually turn off by itself. If you do things yourself, though, it might stay. Thankfully, it’s not too hard to turn it off.
You just need to do what is written below. As long as you do what they say, the maintenance light should turn off. Then, it won’t turn back on again until you need service again.
How Do You Reset the Maintenance Light on a Toyota Corolla?
About every 4,500 miles, the maintenance light will turn off. Then, for about 15 seconds, it will flash to let you know that it’s time for service. But if you keep driving after 5,000 miles, the light will stay on for good.
Luckily, it’s not too hard to turn it off!
To turn off the maintenance light on a Toyota Corolla, do these things.
Bring your car to a complete stop.
Then, find the button that starts the engine.
Turn on the dashboard of the car while leaving the engine off.
There should be a button on your steering wheel that says “trip reset.” Go to Trip A on your trip menu.
You should just have to tap the trip button a few times to do that. Hold on to the reset button once you’re on Trip A.
Press the engine start button near the middle of the car while holding the button.
If you’ve done everything right, the maintenance light should turn off.
When the number 00000 flashes on the screen, you know you’ve held down the reset button long enough. Then you should press the button again to start the engine.
Leave the car alone for a few moments after the instruments go out. The car can be turned back on after that. This time, though, the maintenance light should stay off.
You can also have a service technician work on your Toyota. They will be able to help you turn off the maintenance light. As part of their job, they have to turn off the maintenance light.
Should I Reset the Maintenance Light After An Oil Change?
Most of the time, the maintenance light comes on when it’s time to change the oil. So, if you changed the oil, you might want to turn it off.
To do that, just follow the steps given above. Most of the time, it will be taken care of by your service technician. But sometimes they might forget about it.
If they say yes, you can give them the car back. Then, ask them about the light that says “maintenance.”
You could also just handle it yourself. Make sure that the Trip A screen is showing on your Toyota. Then, press and hold the reset button for around 15 seconds.
If you hold the button for long enough, the number “00000” should flash on the screen. When you see that number, you can turn off the engine.
Leave the engine alone for about a minute after you turn it off. Turn it back on after that. The maintenance light should have been turned off at that point.
If it’s still on, you probably didn’t hold down the maintenance light for long enough. Repeat the steps, but this time hold the button for a little longer. Before you turn off the engine, make sure the number “00000” flashes on the screen.
If you did that right, it will turn off the maintenance light. Turn the engine back on, and you’ll be ready to go.
Why Is the Maintenance Light Important?
When you need to change the oil, the maintenance light will let you know. After 4,500 miles, it will turn off. Then, for about 15 seconds, it will flash. Most of the time, it’s hard to ignore a dashboard light that keeps flashing!
If you keep driving for another 500 miles, the light will stay on for good. Sometimes, people drive their cars with synthetic oil. These will last much longer than regular oils. So, you might not need to change the oil at 4,500 miles. Even so, it’s still a good idea to get your Toyota serviced.
There could be a lot of other things that need to be done. You might, for example, need to add more washer fluid. You might also need to add more transmission fluid.
Check your brake pads with someone. The longer you’ve been driving, the more things you might need to keep up with. A trained technician will know what needs to be taken care of. And when they’re done, they’ll turn off the maintenance light for you.
Rotating the tyres is another good idea. Most of the time, your front tyres will wear out a little faster than the ones in the back. Because they are the ones that spin as they turn.
When they’re turned, it makes them feel more pressure. So, their tread will wear out a lot faster. If you don’t move them back, you’ll have to buy new ones sooner.
If you rotate your tyres often, they could last a lot longer in the long run. You could also ask how much tread is left on the tyres. So, you can plan for when you will need to buy new ones.
You can also ask someone to take a look at your brake pads. Most of the time, these last about 60,000 miles. If you break things with a lot of force, they may not last as long. By changing the pads, you can protect the rotors.
When your pads wear out, you’ll be able to feel metal on the rotors. If you rub metal against them, they can bend. Then you will also have to replace them.
How Does the Maintenance Light Work on a Toyota Corolla?
After a certain number of miles, the maintenance light on a Toyota comes on. It should tell you when you need to stop for service. Most of the time, all you’ll need is an oil change. But you might also need extra service.
It’s always a good idea to stop when the maintenance light comes on. When you own a car, it’s important to take care of it regularly. If you don’t, you might break some of its moving parts.
About every 4,500 miles, the maintenance light comes on. But it won’t stay that way forever. It will turn on and flash in the dash for a few seconds. Then it will turn off again.
If you keep driving without turning it off, it will stay on all the time. This happens when you haven’t stopped for service for more than 5,000 miles.
But it’s not hard to set it back up. Most of the time, when you stop for service, your technician will take care of it. But they could forget to turn it back on.
You could also do all the work yourself. If that’s the case, you’ll have to manually reset it.
It’s not too hard to reset it on your own. Just move the trip menu to the screen for Trip A. Then, press and hold the trip reset button for a few seconds. After a while, the number 00000 will start flashing on the screen. Then, in a push-start car, you can press the engine start button.
For other cars, you have to turn the key in the ignition. Try turning it all the way off to see if that helps. Turn the key again and watch what happens. The maintenance light won’t come on if you’ve done everything right.
Some cars have a screen that shows a lot of different things. On them, the maintenance light is turned off in a different way. Find the settings menu using the touch screen.
From there, look for the word “maintenance.” When you see that, you can click the button. It should take you to a menu with a lot of choices.
Look for something with the word “maintenance” on it. Then go to this menu. On the screen, you’ll see a list of things you can do. Find the button that says “reset.” Hold it down for a few seconds. If you hold it long enough, the maintenance light should go out.
The Maintenance Light on a Toyota Corolla
The check engine light is not the same as the maintenance light. Only when you need to stop for service does your maintenance light come on.
When something is wrong with the car, the “Check Engine” light comes on. For example, the battery might not be getting charged by the alternator.
The maintenance light on your Toyota doesn’t mean anything is wrong. It just tells you to stop every so often for maintenance.
